My Latest Build

[Jimothey]

On 05/08/2025 at 22:47, Richard R said:

If I understand  correctly, the routed shape of the pickguard lifts away from the body as a separate piece.

But it appears to match exactly to the surrounding wood of the bass body, implying it was cut from that wood.

Assuming the cut didn't go all the way through the body, then the only way I could do this would be to assemble the top, cut the cover, glue the top to the rest of the body, route the cavity and when all is done put the cover on.

Is that how it's done?

 

Yeah that's right the top is only 6mm thick so I cut that out separately on the the laser engraver then glue the top onto the body and use that as the template to rout the body shape, then I rout out all the cavities, fit the magnets and hey presto flush mounted pickguard 👍🏻

[Andyjr1515]

On 07/08/2025 at 10:22, Jimothey said:

Yeah that's right the top is only 6mm thick so I cut that out separately on the the laser engraver then glue the top onto the body and use that as the template to rout the body shape, then I rout out all the cavities, fit the magnets and hey presto flush mounted pickguard 👍🏻

Laser engravers are stunning bits of kit.  And this is a stunning use of a laser engraver.  5 gold stars and smiley face - ⭐⭐⭐⭐⭐ 

[Richard R]

Where do you advertise these for sale?

I'd like to point a couple of friends to your site as the designs would suit their band.

[rubis]

On 28/07/2025 at 03:53, Jimothey said:

It's a flush fitting pickguard so it detaches and held in place by magnets

Love it, what a great feature! 

[Jimothey]

On 10/08/2025 at 10:02, Richard R said:

Where do you advertise these for sale?

I'd like to point a couple of friends to your site as the designs would suit their band.

 

That would be great thanks 👍🏻

 

Here's the link to my Facebook page 

 

https://www.facebook.com/share/1HxMyuT1Me/

[Richard R]

Shared on. Some nice stuff on there!