Jump to content
Why become a member? ×

3D Printed B2A Pickup Bezel


SpondonBassed
 Share

Recommended Posts

Okay so it's more repair than build but I thought it deserved its own thread rather than hijack Rob's 3D Guitar thread any further.

 

Some time back I mentioned on that thread that I had a damaged pickup bezel on my B2A and he immediately offered to 3D print it for me - free of charge.  He wouldn't even let me cover postage.  I sent him an STL file I downloaded from the 'net.  He remodelled it to his own satisfaction and sent me two set of bezels.

 

@rwillett,  As promised, here is a photo of the job.

 

B2ABezels.thumb.jpg.b8895afa59aeaff0e42edee828a28cfc.jpg

 

  • Left:  The original bezel.  It was flimsy.   With one corner missing it left my thumb exposed to the sharp edge of the countersunk screwhead just where I need to rest it.
  • Centre:  Rob's 3D print as received.  Rob wasn't happy with the finish.  As he mentioned, on his guitar thread, he was chasing a bug on his printer.  I was completely happy though.
  • Right:  Rob's print sanded progressively from 180 through 800 to finish with 2500 wet and dry.  Holes cleaned up to size and rounded edges as per original.  I had him print them a bit thicker. maybe a mm or so and they're much better.

 

They fit perfectly on the bass and are an improvement over the original, thin, plastic bezels.

 

Thanks Rob!

Edited by SpondonBassed
  • Like 8
Link to comment
Share on other sites

5 hours ago, SpondonBassed said:

 

  • Left:  The original bezel.  It was flimsy.   With one corner missing it left my thumb exposed to the sharp edge of the countersunk screwhead just where I need to rest it.

You could have flipped the bezel so the sharp bit was on the opposite corner to your thumb.

 

Jus sayin' 🤪

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...