Jump to content
Why become a member? ×

Micro cab


Pea Turgh
 Share

Recommended Posts

Hello peeps!

 

I’ve finally started my house jam cab, designs courtesy of @Phil Starr!!

 

 

I had a big old offcut of 18mm ply that has served as a trestle table, desk, and shed work bench.  It’s very rough, with some delamination but overall solid (and I really hate waste).

 

I don’t have a huge variety of tools, so mostly I’ve been waiting to borrow a circular saw from my neighbour!  It’s a 1750w beast!!!

 

I used an old IKEA wardrobe door as my straight edge 🤦🏻.  I now have all the panels cut ready for assembly!

 

 

E6A74DF8-C199-4077-8F76-7AEE8B58DA28.jpeg

 

89B4F520-2066-4CB8-9A63-DBD5F05B4FE0.jpeg

27F4CF76-B2E7-48F9-94D2-F32BA0374A4E.jpeg

Edited by Pea Turgh
  • Like 3
Link to comment
Share on other sites

This little cab was going to be for me, but my lad has started playing recently, and he needs something small for his room.  Perfect!

 

Popped out the shed during my lunch break to cut the front baffle hole and stick some bits together.  I’m glueing and screwing through lack of clamps, so will pop the screws out to round over the edges, then either reinsert or fill with skinny dowel.

 

I messed up measurements on the side panels - they are a bit too short.  I failed to take account of the 3mm blade width when setting my straight edge.  Ah well.

 

Got the lad in to help (never mind the GCSE revision 🤪).

 

B8FCA6F0-AB12-4ECF-86A9-1CE1FC90FC4F.jpeg

 

 

E4C3D8E6-B3C9-429C-8970-D395B1A7DA24.jpeg

Edited by Pea Turgh
  • Like 3
Link to comment
Share on other sites

This is a coincidence, spent last night playing a pub in Hereford with the original little cab. I take it on holiday with a Warwick Gnome for impromptu performances and practice. It does fill quite a decent sized pub so long as you aren't trying to match a drumkit.

 

Good to see this about to happen, hope you enjoy it and your son get's the grades he wants :)

 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

All stuck together now.  Though my cutting isn’t perfect - small gaps and overhangs.  Nothing copious amounts of filler and sanding can’t sort.  I had an old tube of No More Nails to use as filler and extra grip between the gaps.  It’s actually helped quite a lot.

 

I’ll leave it dry fully, then take a sander to it to make all the panels and edges as flat to each other as possible.  Then find a router somewhere (popping the screws out to do the roundovers).  Maybe try the new Library Of Things that’s recently been set up in town.

 

 

939A80AF-7BDB-47D0-857E-17756C2C482F.jpeg

Edited by Pea Turgh
  • Like 1
Link to comment
Share on other sites

Roundover done!  This ply is a nice colour - contemplating several hours with the sander for a natural finish.

 

Any guesses on the wood type?  Very red.  Looks like mahogany, but mahogany ply doesn’t exist, does it?

 

 

 

 

7F464AB3-5D8B-41A7-AD08-501863ABBF9B.jpeg

Link to comment
Share on other sites

It's probably just a generic 'hardwood' ply. Judging by the pics it looks like one of the outer faces is a decent hardwood and is darker and redder than the others. Ply is graded with the outer faces of various qualities so A/B would have one good face and one OK but with the odd filled bit/knot etc. Hopefully you will have all the good faces on the outside. It won't be mahogany but an african/Brazilian or other tropical hardwood which looks mahogany ish. 

 

If you don't mind the effort sand it and see what it looks like. wipe the sanded surface with a damp cloth and it will give you a reasonable glimpse of how it will look when oiled/varnished. If you don't like it then the sanding will give you a better finish for painting with Tuff Cote or whatever else you decide to use.

 

For a cab that size I might have an off-cut of vinyl. I'll look when I get back home next week.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

After cleaning it up for filler, I realise there is too much tear out to make a good job of a natural finish.  I shall go with paint.  Fancy a dark greyish blue.  Looks like Tuff Cab is all out of stock in the colours I want, so will see what I can get elsewhere.

 

 

Edited by Pea Turgh
  • Like 1
Link to comment
Share on other sites

Hmm, Tuff Cab is water based, and smells like an acrylic emulsion. I wonder if it would take the pigments they use to colourise emulsion paints. Out local shop will have a go at colourising pretty much anything. I wonder if you got a lighter blue or grey you could get near the colour you want by getting someone to add in more pigment. Obviously that risks wasting a can of paint. The base paint they use for dark emulsions are the same colours as the grey undercoats you use for for dark paint. Damn you @Pea Turgh you have me thinking :)

  • Like 1
  • Haha 1
Link to comment
Share on other sites

Sanding and filling and sanding done.  On with the paint.  Accidentally bought satin black, and made a mess of the spray job, so it’ll be out with the sander again tomorrow 🤦🏻
However, I have mixed a nice shade of blue (in emulsion, then will seal it in with Matt varnish).  Will paint over the black bit with it too.  Maybe.

 

 

290D5801-020F-4C0F-87EA-CDC9C5A81B40.jpeg

  • Like 5
Link to comment
Share on other sites

Had to paint over a couple of bits, so progress has slowed, but just put the final coat of varnish on the last two panels, and murdered a pillow for wadding the inside.  Tried to staple it in but that didn’t work, so went with drawing pins.  That plus friction fit seems to have worked out nicely!

 

Feet fitted, too.

 

 

Edited by Pea Turgh
  • Like 2
Link to comment
Share on other sites

My super scientific way of determining centre of gravity for handle placement - balance it on a bit of wood!

24366335-DCC2-4239-80D1-F3093D456998.thumb.jpeg.fa753e3d388a4b1cf8882cd7a6c48502.jpeg

 

It’s a beast - 5kg.  Hopefully that will translate to audio heft too.

 

waiting for two things now; spade clips to wire it internally, and a jack-to-jack speaker lead to connect the blighter up.

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...

Finally fitted the port.

 

The cab has been in daily use with my son since I posted the last pics, so I don’t know whether it’s just because I forgot how it sounds, the speaker is “burned in”, or confirmation bias, but this tiny thing sounds absolutely ridiculous!  I’ll get the lad to give it a hiding when he gets in to see if he notices such a vast improvement.

 

 

Thanks again @Phil Starrfor the plans and encouragement 👍

 

Will be back on to the Peterson mods next!!!

Edited by Pea Turgh
  • Like 3
Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...