Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Ibanez GSR205 New Body Shape Finished FOR GOOD THIS TIME!!


Jimothey

Recommended Posts

This isn’t the build I planned on doing fist but I’m waiting on some veneer for the ‘51 P Bass so I thought it start on this instead

Ive got a Ibanez GSR205 that I don’t particularly like so I thought I’d modify it into more of a Warwick Corvette-ish shape

033034B7-5277-4871-ADDB-E69B220AD5A1.thumb.jpeg.3b1435e3db6c64397f2afa7378f29ca3.jpeg

So I made my template (that ended up looking a bit like Frankenstein’s bride but it should work???)

7990195D-7F07-48DB-81CB-91A6FE8DD883.thumb.jpeg.df1230062c73c71f2e88eac1576b30e5.jpeg

Made sure the template fitted ok

51C09DCC-F933-4599-9620-15653D4C05B7.thumb.jpeg.5aacade36d804598b7ee266bed630cca.jpeg

Cut out the template then had a B******S!!!!!! moment I thought the bottom edge didn’t go over the edge of the cavity 

11DBA17C-C84E-458F-B5BE-2212E31C3395.thumb.jpeg.3cde07109d60f7989e1a6418cf2fc187.jpeg

But it did!?!

3354C7E2-ED26-424F-9DD1-D467425CD65C.thumb.jpeg.bf7f5fde3a6582799a2aad72de3f9258.jpeg

Filled the old holes and a few crappy bits round the outside (bloody bearing came off the router bit) and sanded the edge, so next job is sort out the edge of the cavity and start contouring the body.......... 

 

 

Edited by Jimothey
Link to comment
Share on other sites

Me too.

Mind you, I was a bit jealous of you having an Ibby body to muck about with.  I am keeping an eye out for Ibby SR bargains at the moment because I really like the shape of some of them.  I'd have smoothed that body off to look like the others in the range.  More sucked sweet than slab of cake if you get me.

Have you plans for the neck?

Link to comment
Share on other sites

 

2 hours ago, SpondonBassed said:

Me too.

Mind you, I was a bit jealous of you having an Ibby body to muck about with.  I am keeping an eye out for Ibby SR bargains at the moment because I really like the shape of some of them.  I'd have smoothed that body off to look like the others in the range.  More sucked sweet than slab of cake if you get me.

Have you plans for the neck?

I’m probably just going to dye the fingerboard black and just colour match the headstock to the body and I’m thinking maybe a custom pickguard but I haven’t decided yet??

I bought it a couple of years ago (£45) and never got round to doing anything with it the electrics are shot except for the pickups so I’m just going to re-wire it, 

I like some of the more expensive SR’s but this is just from the gio range so its cheapest of the cheap so that’s why I thought I’d have a go at modding it?! I really like the shape of the corvette and I can’t afford a real Warwick so I thought this build will be just a bit of fun?!,  I’m not going to spend a lot of money on it 

 

Edited by Jimothey
Link to comment
Share on other sites

Watching with great interest, @Jimothey;)

We all have those scary 'Oh c**p' moments, by the way.  I've learned to force myself to turn a body round and always look at what's on the other side purely on the basis of the number of times I've routed into fresh air when I was expecting to be cutting wood chips! xD

  • Haha 1
Link to comment
Share on other sites

44 minutes ago, Andyjr1515 said:

Watching with great interest, @Jimothey;)

We all have those scary 'Oh c**p' moments, by the way.  I've learned to force myself to turn a body round and always look at what's on the other side purely on the basis of the number of times I've routed into fresh air when I was expecting to be cutting wood chips! xD

That’s what I did I even put the template on the bottom and it looked like I would have had 5mm to spare but I must have put it a bit further up on the top doh!!!! Not too much of an issue tho, I’ve got to rout out the cavity bigger anyway to allow for the pots to move over 

I don’t know if I’m going to veneer this one as funds are a bit tight (the cam belt snapped on Mrs Jimotheys car £££££!!!!) but I have seen some Red Ebony that has taken my fancy?? 

Link to comment
Share on other sites

Still not much more progress I’m hoping to do a bit more this week.....

Ive got a bit of a dilemma tho the top horn isn’t  as long as I hoped it would be so I want to cut a bit more out 

80A19E5B-5072-450B-B359-BC5824147FD5.thumb.jpeg.4bf882b728f2618d7cbf5494a50a75c7.jpeg

But that would mean the neck pocket will be shortened from 100mm down to 65mm 

3366459B-D368-412B-83E3-91ED8A62F85E.thumb.jpeg.5261257cd79d8b3bb74bfa2230e61d45.jpeg

Which I think is a bit short and won’t really give a lot of support??? I was maybe thinking about leaving the full length of the neck pocket but still cutting the contour longer

C9455CF7-BABF-4B6D-99F5-51D836F40179.thumb.jpeg.eb5b59d50bfc99dccdc2da7777cefc29.jpeg

Or will that just leave the end of the neck pocket too weak??? 

If anyone’s got any ideas on the best way forward please let me know

Link to comment
Share on other sites

3 minutes ago, ezbass said:

This is going to be good, I can feel it. I like the shape of the lower bout and the reinforcing you've done there. Colour? I think I'd go with white.

Thanks it’s definitely coming out better than I first thought it would, It will kinda look corvette-ish but also a little bit different, I had some black paint so I thought I’d give it a spray but I’m now thinking it should go white 

CDB2F84C-8D8F-4E3F-8EAA-FB0DF1B779FE.thumb.jpeg.b313f5b2a6b2e9db791ba55b8a8577fa.jpeg

Link to comment
Share on other sites

4 minutes ago, Jimothey said:

I had some black paint so I thought I’d give it a spray but I’m now thinking it should go white 

I think it'll be easier to get a visually nicer finish in white. Plus, you don't see too many white Corvettes (or Corvette-alikes).

Link to comment
Share on other sites

32827E19-5F96-47F1-8A7D-EC6D7DFEC54E.thumb.jpeg.f384b4d77e9bc0b8d751ce70fdfc7a71.jpeg

It’s getting there!?! I don’t think it’s looking too bad??

Ive scrapped the pickguard idea it didn’t look right 

Hopefully I’ll finish painting it in the next couple of weeks then I just need to get a new bone nut to replace the crappy plastic one and decide where the controls are going?

Edited by Jimothey
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...