SgtD Posted May 31, 2014 Share Posted May 31, 2014 Anybody had the same problem? and how to go about resolving it. The clip that fits around the outside of the nut has snapped off and gone missing.(pic on left) The clip itself is part of the neck/head (pic on right) The nut itself is fine and stays in place until I change strings and then it falls out! 😕 Don't really want to lose the nut as well New nut maybe? But not sure how a new one would fasten on. Any suggestions would be much appreciated! Thanks. Quote Link to comment Share on other sites More sharing options...
aende Posted June 2, 2014 Share Posted June 2, 2014 Hiya, This happened to my corvette - been like this for years. I would say 'don't panic' - still okay. You have to replace the entire nut, you can get them from Warwicks webstore, they are simple to fit. Quote Link to comment Share on other sites More sharing options...
lemmywinks Posted June 2, 2014 Share Posted June 2, 2014 Common problem on the plastic Just-a-Nut, mine did this not long after I bought it. Just be careful when you change strings! Thomann also sell them and you can also get the brass ones IIRC. Quote Link to comment Share on other sites More sharing options...
rmcki Posted June 2, 2014 Share Posted June 2, 2014 Replace with "Just A Nut III" Took me 3-4 mins and it was done, there is a video tutorial http://m.youtube.com/watch?v=wjCuHGLB-1I Quote Link to comment Share on other sites More sharing options...
3below Posted June 3, 2014 Share Posted June 3, 2014 One of mine has suffered the same fate as yours. As long as I change strings one at a time it stays put so I have not bothered to replace it. You may be lucky as well. Quote Link to comment Share on other sites More sharing options...
gafbass02 Posted June 6, 2014 Share Posted June 6, 2014 Every single Warwick I've owned with type of nut did just that, nothing to worry about boss Quote Link to comment Share on other sites More sharing options...
SgtD Posted June 12, 2014 Author Share Posted June 12, 2014 Thanks for advice guys Think I'll invest in a brass nut. Can't see that braking. Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.