Jump to content
Why become a member? ×

Jazz bass - stacked knob compared to V / V / T


ead
 Share

Recommended Posts

I've tried a few searches on here regarding this, but so far I've either not found the magic search term or, less likely, there are no threads on the topic so...Has anybody on here tried the two variations back to back, and if so do you notice a real difference?

Link to comment
Share on other sites

I've swapped - the stacked version has a bit less output, and seems a bit warmer/smoother. It could just be a gain difference, but I felt there was a bit less "burp" to the back pickup. Overall, I prefer the three knob version - less to think about, and frankly the more subtle tone variations are lost on most gigs!

Link to comment
Share on other sites

The VVTT puts a greater load on the pickups plus the original pots values were 250/250, not 250/500, though that circuit was discontinued in the early days of the Jazz. As above, loads of stuff on Talkbass about this.

FWIW most modern stackers just have the caps in place rather than the resistors and this helps with the output signal. I have a Jazz with 250/250 plus the caps and resisitors and it is a bit quieter but still very funky.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...