Jigster Posted August 1, 2012 Share Posted August 1, 2012 (edited) [color=#282828][font=helvetica, arial, sans-serif]I've split this from an earlier ad in which it was sharing space with a BBN5[/font][/color] [color=#282828][font=helvetica, arial, sans-serif][b][size=4]So[/size][/b]....here is a lined fretless Yamaha BB350F that, altho I'm enjoying learning to play, needs to go to try and fund something else. It's from the early to mid 90's, P/J config, loads of great tones. I got it off fellow BCer Talon who got it off ebay. It's not pretty, someone added some decoration around the pick ups, but it sounds great and has a true and smooth neck. A good first lined fretless?[/font][/color] [attachment=114640:IMG_1745.jpg] [attachment=114720:IMG_1744.jpg] [attachment=114641:IMG_1749.jpg] [attachment=114642:IMG_1750.jpg] [attachment=114643:IMG_1740.jpg] Edited August 15, 2012 by Jigster Link to comment Share on other sites More sharing options...
alyctes Posted August 1, 2012 Share Posted August 1, 2012 Is it unlined? The photo with the BBN5 looks as if the board is lined. Link to comment Share on other sites More sharing options...
Jigster Posted August 1, 2012 Author Share Posted August 1, 2012 Sorry my mistake, I've written that it's both lined and unlined. Doh! It's LINED Link to comment Share on other sites More sharing options...
Jigster Posted August 1, 2012 Author Share Posted August 1, 2012 buump Link to comment Share on other sites More sharing options...
Zenitram Posted August 1, 2012 Share Posted August 1, 2012 One day I will buy this bass. Link to comment Share on other sites More sharing options...
Jigster Posted August 1, 2012 Author Share Posted August 1, 2012 look into my eyes: you will buy the bass today...and wake Link to comment Share on other sites More sharing options...
Sambrook Posted August 1, 2012 Share Posted August 1, 2012 The bass looks good, can you give me the neck dimensions- depth and width at the nut? Thanks Link to comment Share on other sites More sharing options...
Jigster Posted August 1, 2012 Author Share Posted August 1, 2012 [color=#282828][font=helvetica, arial, sans-serif]Hi Sambrook[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]The width at the nut is 45mm - I'm not sure how to measure the depth, suffice to say the neck profile is very thin at the nut and not at all P like as the 45 mm might suggest.[/font][/color] Link to comment Share on other sites More sharing options...
Sambrook Posted August 1, 2012 Share Posted August 1, 2012 Sorry, just realised I've already asked you the above, and been answered! Width is perfect, but I need a thick chunky depth. Link to comment Share on other sites More sharing options...
Jigster Posted August 6, 2012 Author Share Posted August 6, 2012 bolt bump Link to comment Share on other sites More sharing options...
Jigster Posted August 9, 2012 Author Share Posted August 9, 2012 up atcha Link to comment Share on other sites More sharing options...
Recommended Posts