SWR big ben frequency response

[Subthumper]

Hi all, as the title suggests I'm trying to find out the response of this cab as I have to build a crossover for it to run with a 2X10. I know that manufacturers are usually a little optimistic and somewhat vague with their figures so was wondering if anyone might know. Or if anyone can tell me what speaker is used so I can look up the spec somewhere.
Cheers Just

[Sharkfinger]

I used to own one, along with an SWR 2x10. I couldn't give you an exact figure but I'd say look around the bottom of the 'low-mid' range. Maybe around the 60Hz range?

[Badass]

For a PDF manual, I see freq response is 25Hz - 3KHz

Manual here: [url="http://www.musiciansfriend.com/derivates/25/001/430/863/DV040_PDF_Copy_2EF60262-77BB-4540-8B4B-3A558B3C7374.pdf"]http://www.musiciansfriend.com/derivates/25/001/430/863/DV040_PDF_Copy_2EF60262-77BB-4540-8B4B-3A558B3C7374.pdf[/url]

[winterfire666]

depends on the driver, the original ones were loaded with the epic bagend driver, these were replaced with a custom eminence at some point which doesnt go as low or as high

[Balcro]

You might want to plough through this recent thread to get some idea of the possible complications -

http://basschat.co.uk/topic/180507-does-anyone-make-a-separate-mid-range-speaker-for-a-modular-system/


You need to consider the efficiency of the proposed 2x10 so that it matches the loudness of the BigBen. The SWR website says the Big Ben has a reference efficiency of 97dB for 1 watt of input. What is the specification for your 2x10?

Balcro.