throwoff Posted April 20, 2012 Share Posted April 20, 2012 I have just bought a Hartke Transporter 410 which has 4 alu coned 8ohm drivers. Ideally I want a 4ohm cab Can I rewire the inside to make it 4ohm, I am sure I can but not sure how. Can anyone point me in the right direction. Quote Link to comment Share on other sites More sharing options...
throwoff Posted April 20, 2012 Author Share Posted April 20, 2012 And as I ask google tells me no! I can get 32 or 2! Oh well! Quote Link to comment Share on other sites More sharing options...
xgsjx Posted April 20, 2012 Share Posted April 20, 2012 Why do you want to make it a 4Ω cab? You most likely wont notice any difference in volume unless your amp is a 2Ω job. If so, sell your cab & get a 4Ω (or add another 8Ω cab) Quote Link to comment Share on other sites More sharing options...
dannybuoy Posted April 20, 2012 Share Posted April 20, 2012 I think you can only get 2, 8, or 32 with 4x 8ohm drivers. Only way to change is to replace the speakers, so you may as well buy another cab! Quote Link to comment Share on other sites More sharing options...
flyfisher Posted April 20, 2012 Share Posted April 20, 2012 You could probably do it by disconnecting two of the speakers . . . Quote Link to comment Share on other sites More sharing options...
subrob Posted April 21, 2012 Share Posted April 21, 2012 2 in series, paralled with two others in parallel would get you to about 3.2 ohms. expect the two in parallel to need replacing first, tho. this is no better than 2 ohm, as far as your amps health is concerned, really, so to echo the previous, stick with what you've got theOP. if you need more umph, consider picking up a small light single 15 with an 8 ohm driver, pop it underneath. Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.