Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Slap tone


Fly2far
 Share

Recommended Posts

Hi

Following the thread of "useless at slapping" I also find it a fascinating technique (if not overdone).

I've tried most of the books and some vids. but I'm still pretty @@@@. Listening to MarloweDK on youtube and others they all seem to get this fabulous "tone"

I've tried all "scooped" settings on various amps but still unable to get that "tone".

Are they using some sort of pedal to enhance the tone ie: phaser or flanger etc.

Guitars used are 1970+ Fender USA jazz/GB 5 Spitfire and 4 str. Nightingale.Amps Trace 12 preamp/Ashdown Mark King and Hartke 5000. All these basses and amps are capable so perhaps it's me.

Cheers

:)

Link to comment
Share on other sites

Dont know about the Nightingale but the Jazz and GB are defo slap machines and I should think the Ashdown Mark King does the job as well. You dont mention cabs mind but unless you are using a 1x18 you should not have a problem. I think slappers prefer lighter strings and not flats :) . Compression is the key to slap playing cos it evens out the slaps and the pops.

But what do I know, have not slapped for 20 years.

Link to comment
Share on other sites

Believe it or not the tone MarloweDK gets is via a little Pandora PX4 headphone amp that he plugs into his mac. If you look for one of his videos he goes through his home setup. There are no amps used at all as he 'has neighbours'. He's very impressive and I do love his playing even if it isn't all to my taste. Without doubt he is one of the best players on Youtube.

Link to comment
Share on other sites

For the nicest, least harsh slap tone, I follow the following...

On the bass, make sure both pickups are turned full up, so you have equal volume between them. (Or if you have a pickup balance control, leave it in the centre detent.) Turn treble & bass to full (might want to drop the bass frequency off just a little, depending on how powerful your preamp is!) If you have an on-board mid control, leave it in the middle. If you have a mid boost/slap switch, find the "cut" position. Too much mid just makes the bass sound harsh and unforgiving.

On the amp, it's a similar story - Treble turned to max, bass to about 2 o'clock (depending on how 'bassy' your instrument is), and all mid frequencies bang in the middle.

Just one more thing... Make sure you have clean strings. Dirty old strings don't ring well, and you need that clean, zingy sound for slap.

Enjoy!!!

Link to comment
Share on other sites

Well, I realise that i'm in the minority, but....

A small bit of overdrive will give you the limiting you need when slapping. It'll also give your treble a boost (opposite to most compressors) which means it'll cut through more. I tend to find that some people's slap tone is either really biting - too harsh on the ears, or it's too "squelchy" or just plain thin.

If you listen to old funksters they're all using valve amps that are adding just a bit of overdrive.

Anyway, just my humble opinion! :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...