pietruszka Posted July 29, 2011 Share Posted July 29, 2011 Im experiencing some crackling from my AG500 SC, its going through a Mark Bass STD104. The problem started when I worked on a ferry, when returning from a family matter back onto the boat, I found that the head had been stored upright for 10 days. I wasn't best amused when I saw this and Im paranoid that that may be the reason for the intermittent crackling and drop in signal. I had heard somewhere that it may be something to do with the capacitors when stored in any way but flat? Am I being silly? Any thoughts any one? Im worried as I don't have the money to replace it and I now rely on it, being a working musician now. A worried Dan. Quote Link to comment Share on other sites More sharing options...
molan Posted July 29, 2011 Share Posted July 29, 2011 The AG 500 comes with a handle designed for it to be stored vertically - I don't see how this can have caused a problem? If it is then I'd get on to the 'two Daves' at Aguilar and ask their opinion. In fact, I'd email them anyway and ask for some advice: Dave Avenius is usually pretty helpful [email protected] Quote Link to comment Share on other sites More sharing options...
q_of_doom Posted October 21, 2011 Share Posted October 21, 2011 This is an interesting question. Have you had any feedback, and why would an amp be affected negatively from being stored on its side? Quote Link to comment Share on other sites More sharing options...
aldude Posted October 21, 2011 Share Posted October 21, 2011 Have you tried different cables and cabs? I agree that being stored vertically shouldn't have caused any problems. OTOH, being on a ferry where there is a lot of sea water about and salty air probably didn't do it any favours. Quote Link to comment Share on other sites More sharing options...
warwickhunt Posted October 21, 2011 Share Posted October 21, 2011 The vertical storage shouldn't have any impact whatsoever, I'd have thought it'd be a completely different reason. How old is the amp? I noted that you are in N Sields (I'm less than 10 miles away), I can put you onto a couple of very good local technicians who could give it a service (which is the least that I'd recommend if you are relying on this whilst on cruise/ferries). Better to be safe than sorry! Quote Link to comment Share on other sites More sharing options...
aldude Posted October 21, 2011 Share Posted October 21, 2011 Are you sure it's the amp? It could be a number of other things - electronics in the bass, cable from bass to amp, cable from amp to cab, cab. Quote Link to comment Share on other sites More sharing options...
q_of_doom Posted October 26, 2011 Share Posted October 26, 2011 I've phoned up an electronic engineer that builds amps as a hobby who said it's definitely not from storing on it's side or even upside down. More than likely another problem as mentioned above or mechanical failure inside that amp due to something, like a capacitor working loose. Quote Link to comment Share on other sites More sharing options...
pietruszka Posted October 27, 2011 Author Share Posted October 27, 2011 Hey eveyone! Sorry I havent looked on here for a while. I got the problem sorted, I emailed Aguilar and got a fairly swift response form them. It turned out to be my speakon cable, got a new one from OBBM (insanely highly recommended!) and the volume pot was filthy. Some electrical cleaning fluid sorted that out. I thought it might have been something about the capacitors, I had been scared about this earlier in the year, I suppose its just me being a gullible tit! Hats off to Aguilar for there customer service, and everyone who threw in suggestions. Dan P.S In hindsight, I feel rather thick. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.