Bero Posted September 22, 2010 Share Posted September 22, 2010 Looking to get power supplies for some pedals, do Boss, Digitech Fender pedals all use the same connector to pedal, was going to get one of those Boss power supplies off ebay with 6 outputs Would it work? Quote Link to comment Share on other sites More sharing options...
Dood Posted September 22, 2010 Share Posted September 22, 2010 [quote name='Bero' post='964909' date='Sep 22 2010, 08:38 PM']Looking to get power supplies for some pedals, do Boss, Digitech Fender pedals all use the same connector to pedal, was going to get one of those Boss power supplies off ebay with 6 outputs Would it work?[/quote] Hey Bero, you might need to be a bit more specific - as one or two pedals *do* use a different type of power supply than the standard Boss AC>DC adaptor. For example, my Digitech Looper requires an AC>AC type instead. If you list what you have, we'll be able to advise better Quote Link to comment Share on other sites More sharing options...
Bero Posted September 22, 2010 Author Share Posted September 22, 2010 ok, have Digitech Bass Squeeze, Fender Tuner, Boss AB2, Behringer DI, Boss EQ Quote Link to comment Share on other sites More sharing options...
GarethFlatlands Posted September 22, 2010 Share Posted September 22, 2010 [quote name='Bero' post='965085' date='Sep 22 2010, 10:41 PM']ok, have Digitech Bass Squeeze, Fender Tuner, Boss AB2, Behringer DI, Boss EQ[/quote] I'm pretty sure they're all standard 9v barrell type plugs with negative ground so a standard supply should work. Nothing out of the ordinary that might use 18v or reverse polarity. Quote Link to comment Share on other sites More sharing options...
Bero Posted September 22, 2010 Author Share Posted September 22, 2010 yeah, all standard 9v Thanks Quote Link to comment Share on other sites More sharing options...
KiOgon Posted September 23, 2010 Share Posted September 23, 2010 PM incoming Quote Link to comment Share on other sites More sharing options...
Dood Posted September 24, 2010 Share Posted September 24, 2010 [quote name='GarethFlatlands' post='965098' date='Sep 22 2010, 10:52 PM']I'm pretty sure they're all standard 9v barrell type plugs with negative ground so a standard supply should work. Nothing out of the ordinary that might use 18v or reverse polarity.[/quote] Yup agree with you there - So a standard 9V DC PSU that has the capacity to handle the current drain of all the pedals and one of those 'daisy chain' cables you can get from Maplin would be fine. Quote Link to comment Share on other sites More sharing options...
danny-79 Posted September 24, 2010 Share Posted September 24, 2010 Check this place out [url="http://www.johnnyshredfreak.com/store/index.php?main_page=product_info&cPath=8&products_id=12"]http://www.johnnyshredfreak.com/store/inde...;products_id=12[/url] I brought one a while ago after being recommended on here, gotta say that its great, works a treat, i power my whole board of it with 2x daisy chains, never liked the idea of daisy chaining but it works just great with no hiss or hum Have a look around the site, theres a fitting for pretty much everything Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.