Bassdude BE

EDIT: Cab is sold now, head is still available.

PS: It's so lighweight I could probably send it with regular mail and usually no VAT  is charged  when a package is send that way.  

PRICEDROP => 430£ BARGAIN! ;)

Lightweight Power from Tecamp Amplification (= Eich amps)!!

Tecamp Puma 900 specifications:

Preamp: solid state preamp with gain, taste, lo, lomid, himid, hi, master controls, switchable mute, DI pre/post, XLR balanced DI out, serial effects loop, tuner out, line out, line in
Output RMS: 900 w (4 ohms), 600 w (8 ohms)

Power Amp: Class DPower Consumption: 1000 w
Outputs: Speakon® combo connectors with ¼“ jack
DI Out: balanced, pre/post switchable
Dimensions: (W x H x D):
27 cm x 4,5 cm x 21 cm / 10.7″ x 1.6″ x 8.3″
WEIGHT: 1,49 kg / 2.2 lbs

The amp comes with fitting, high quality Eich amps gigbag.
Can be tested and picked up in Ghent, Belgium.
Will ship worldwide!

Kind regards,

Donovan

Oooh, I'd love this!

Too bad Brexit makes most deals a lot less interesting these days or I might've snapped it up already..

1 hour ago, police squad said:

Don,

are these la bellas long enough to be strung through the body. I have them on my Hofner and like them a lot

thanks

Mart

No these are for stringing through the bridge only, for stringing through the body I would recommended the Labella F-MUS set, these are made for stringing through the body and have about the  same tension and feel like the normal LTF shortscale set.  

https://www.labella.com/products/760f-mus-stainless-steel-flat-wound-30-scale/

Is there an update on this already?

I'm based in Belgium and bought a bass cab here on the forum a couple of weeks ago,

but due to this whole Brexit thing the U.K. based seller hasn't been able to ship it to me as most couriers are not accepting any packages for overseas shipping yet untill this whole thing clears out.

Any idea which couriers DO send overseas atm?

Thanks in advance!

Donovan

10 hours ago, Guilaume1982 said:

Hi Guillaume,

to most people the Sire U5 will be good as it is without any work by a professional.

If you are a nitpicker like me you might want to upgrade the tuners and pickups at some point, but that's a very personal thing and mostly a matter of taste (I even mod >2000Euro basses that already have quality hardware with other quality hardware, just because I prefer a certain brand of tuners and/or pickups.. I just like to work on instruments in general, so a lot of the mods I do are not so much out of neccesity, but rather to give my personal flair to the instrument...).

The gigbag I use for my U5 and other short scales is this one (a perfect fit!):

https://www.thomann.de/be/thomann_gigbag_deluxe_egitarre.htm

As to the Labella strings I prefer to use the La Bella 760FL-S Deep Talkin Bass shortscale flatwound set on my short scale basses as they have just the right amount of tension to compensate for the sloppiness that often comes with the shorter scale, yet they play effortlesly and have a great sound to them. Again, this is very subjective, but if you like playing on flatwound strings you can't go wrong with Labella i.m.o.

https://www.thomann.de/be/la_bella_760fl_s_deep_talkin_bass.htm

Hope you enjoy your new bass!

Kind regards,

Don

Wow, that must be my dream rig and I just sold my old amp.. Please let me know if either becomes available again.

PM'd!

5 hours ago, panos71n said:

hello, is shipping to Greece possible for the cab only?

 

Hi @panos7,

 I've got someone coming over next week who's interested in buying both the amp and cab.

So I'm going to wait untill then,

if  it turns out he doesn't buy the set we can discuss shipping the cab.  

Kind regards,

Stay safe! 

Don

If you change your mind on shipping I´ll take it...

NOW WITH FREE SHIPPING TO U.K: MAINLAND!!

Schecter Diamond QPA Precision pickup from a brand new Schecter Banshee bass (replaced with an Aguilar P4 mid 60's pickup immediately after purchase, because I am a huge fan of that pickup's sound). Pickup still has the full length of the wiring attached and is of course in like new condition.

Soundclip: 

Asking price: 45GBP/50Euro + shipping cost, 

but I´m also interested in a trade with a TC electronic Polytune 3 mini.

Pictures will follow later.

Kind regards,

Stay Safe!

bump

MB Traveller 102p-4 spec sheet:

IMPEDENCE: 4 ohms

SPEAKER SIZE
2x10 in.
BASS PORT
rear
TWEETER
piezo
POWER HANDLING
400W RMS (AES Standard)
CROSSOVER FREQUENCY
3.5 kHz
FREQUENCY RESPONSE
45 Hz to 18 kHz
SENSITIVITY
101 dB SPL
WEIGHT RANGE
27.78 lbs / 12.6 Kg to 31.97 lbs / 14.5 Kg
WIDTH
23.23 in. / 59 cm
HEIGHT
12.60 in. / 32 cm
DEPTH
17.13 in. / 43.5 cm

Nano Mark spec sheet:

INPUTS

INPUT: impedance 2 Mohm, max. voltage 15 Vpp

• EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp
•  
• CONTROLS
• GAIN
• MASTER VOLUME
• GROUND LIFT (switch on rear panel)
• PRE/POST EQ (switch on rear panel)
•  
• EQUALIZATION
• LOW: center frequency: 40 Hz; level: ±16 dB
• LOW MID: center frequency: 360 Hz, level: ±16 dB
• HIGH MID: center frequency: 800 Hz, level: ±16 dB
• HIGH: center frequency: 10 kHz, level: ±16 dB
•  
• OUTPUTS
• LINE OUT: balanced XLR, max. voltage 20 Vpp
• EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
• TUNER OUT: unbalanced, max. voltage 2 Vpp
• SPEAKER OUT: speakon/1/4" combo
•  
• OTHER
• WEIGHT: 3.20 lbs / 1.45 kg
• WIDTH: 7.87 in. / 20 cm
• DEPTH: 8.27 in. / 21 cm
• HEIGHT: 2.09 in. / 5.3 cm
• OUTPUT POWER: 300W RMS @ 4 ohm, 150W RMS @ 8 ohm 

Package deal: Buy both the amp and cab and get a 50Euro discount, bringing the total price to 600Euro/550£ for the amp + cab!

Sold locally!

If those are still the same strings that were on there when I traded this with Torvic last year, then they are Thomastik flats.

They were new back then, so they should've settled in nicely by now. G.L.W.T.S.

31 minutes ago, hiram.k.hackenbacker said:

INERTIA was made for @Kev and I bought it off him. It's a wicked good pedal and would recommend it to anyone looking for some decent fuzz sounds.

https://www.cogeffects.co.uk/inertia.php

It is a fantastic pedal indeed and I must admit that COG has been a big inspîration for me to start my own pedal building business.

The custom grand Tarkin in the Inertia is no doubt the best Russian muff based fuzz I've ever used and I've tried most of them, the control over the mid frequencies makes it the most usable Russian Muff style fuzz for any live situation I can imagine and I will definitely use a similar approach when we release our own Green Muff.

The Knightfall was always on in my rockband to ad an extra touch of grit to my sound and if it wasn't for the fact that I have just build a prototype that can sound very close to both the knightfall and the B7-K I would definitely still be using it.

Nothing but respect for COG, these pedals are awesome and the build quality is nothing but excellent! ❤️ 

3 hours ago, rockdog said:

Yes to both.

Uhm..I must say I'm tempted.  

If any of the gear I have for sale here at the moment sells before this is gone I will get back to you.  

1 hour ago, stewblack said:

Would it be considered rude for me to enquire as to this pedal building business of which you speak? Perhaps a link? 

At this moment it is still in the works as I'm working out the final details of my business plan, hoping to have my shop and website up in early 2021.

I can already tell you that one of the pedals that I will be releasing is a compact version of the Moog EQ filter and some Bass-specific OD's and Fuzz pedals very similar to some of the Darkglass pedals, but at a much lower price point. As soon as I've got all the paper work in order and my website up and running I will post a link here on the forum and will then frequently update the thread as new pedals are added to our inventory. 

For Sale:

- COG "Inertia" - Knightfall Distortion and Custom Grand Tarkin Bass Fuzz in one! One of a kind custom pedal! => 185Euro/ 165£

"Inertia" is a custom, one of a kind pedal designed to provide warmth and dynamic distortion through the Knightfall, and huge fuzz tones through the Grand Tarkin while keeping a small footprint overall. Subtle changes were made to each circuit to squeeze the last few drops out of what each could do; with the Knightfall running at 18v, and corner frequency adjustments on the Tone control of the Grand Tarkin, in a very similar way to Dweezil Zappa's Custom Tarkin Fuzz.

24 fret, 19mm spacing at bridge?