Jump to content
Why become a member? ×

mikeydee

Member
 View Profile  See their activity

  • Posts

    79

  • Joined

  • Last visited

 Content Type 

Everything posted by mikeydee

  1. mikeydee
    PM'd
  2. mikeydee
    PM sent
  3. mikeydee
    Hi moos3h, is the kit still available... Was looking at this very one in a music shop today and it seemed the biz.
  4. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  5. mikeydee
    Regularly used pedal though in good nick and in the original box although one small problem is that it does not work reliably on battery but I never use that just an adaptor which case it is fine. Selling to fund an Electro Harmonix Bass Micro Synth Pedal so if you have one to swap then maybe we could make a bargain. Price £50 shipped in the UK. Will add pictures later.
  6. mikeydee
    PIctures added please see link [url="https://www.dropbox.com/sh/cihd4iyhi0emnja/OrVlUtj8Iu/peavey"]https://www.dropbox.com/sh/cihd4iyhi0emnja/OrVlUtj8Iu/peavey[/url]
  7. mikeydee
    Still old peavey parts available. Make an offer.
  8. mikeydee
    That sounds encouraging. If the pre amp is low output then likely to be working but strangled output. To clean pots and switches I use just the tiniest amount of solvent just a half second squeeze of the trigger then turn the pot or switch at least ten times. In terms of the low output prime suspects are dry solder joints, connection points, and components legs. As japanaxe recommends a poke around with music source plugged in and powered on can reveal where the problem is. You have to be very careful though with live apparatus as there will mains and high levels of DC which may even linger after switch off. My personal preference here is for a chop stick. Especially tap away on all jack connectors metal contacts, wires joining the boards and also give controls a bit of a side to side wiggle. Especially anything that controls the channel switching. Hopefully you will get it back to normal.
  9. mikeydee
    Hi are Well made amps I have repaired many over the years. But there are common issues around the switches that they use in the control of valve sound, filters etc. Try giving them a little exercise to see if any sound breaks through either rockers or rotary. Other than that need to isolate the problem. You can do this with patch leads. For example guitar in the front and then signal out from fx send, power amp out or similar to another working amp Will tell you if the preamp is working.
  10. mikeydee
    Photos added and today I learnt to delete my old photos. Much Whooping
  11. mikeydee
    + £10-15 for UK shipping. This is powerful 2U PA amp from a quality manufacturer that I understand is popular for bass guitar players too. It has been in my bands PA used only for vocals, kick and snare. We only do about 10-15 gigs a year so not driven too much though used regularly. Plenty of little scratches but basically in good nick. Specs: 2 x 260W @ 8 ohm 2 x 400W @ 4 ohm Lots more combinations here including bridged, filtered etc. [url="http://www.qscaudio.com/products/amps/rmx/rmx.htm"]http://www.qscaudio....mps/rmx/rmx.htm[/url] [attachment=144614:2013-09-25 07.49.10.jpg] [attachment=144615:2013-09-25 07.49.19.jpg] [attachment=144616:2013-09-25 07.49.26.jpg] [attachment=144617:2013-09-25 07.49.34.jpg] [attachment=144618:2013-09-25 07.49.47.jpg]
  12. mikeydee
    Good condition. Used for PA for past five years but good for bass too. Shipping would be about a tenner to UK only. cheers
  13. mikeydee
    Good condition powerful amp available.
  14. mikeydee
    1U rackmount unbranded stereo 2 way crossover or mono 3 way. Works fine. One knob is slightly bent but looks fine.
  15. mikeydee
    Still available box of parts from Peavey 410 cab. speakers and hardware open to offers
  16. mikeydee
    Reduced to £140 shipped in the UK
  17. mikeydee
    Hi I have an Ashdown Superfly Bass head available. This is a lightweight amp great with programmable EQ, compressor and MIDI. It's a bit hi tech for me. Condition is pretty damn good and comes in its original box, pleather case, strap, ears. Price includes shipping within UK using myHermes which I am assuming is about £10. Superfly 500 head Specifications Power Output (RMS) 2 x 250W into 4 Ohms Line Input 100mV – 5V Line Output 10K Ohms, 0dB DI Output 600 Ohms balanced / Level -20dBu nominal EQ +/- 15dB at 60Hz, 180Hz, 340Hz, 660Hz, 1.3kHz, 2.6kHz, 5kHz H x W x D (mm) 220 x 86 x 360 Weight (kg) 4.5 Notch Filter 10K Ohms, 0dB USB, MIDI 30 Factory, 69 User You can come and try it out in Bristol most evenings if you like. Any questions please feel free. I check mails daily.
  18. mikeydee
    [b] Just sold my Ashdown Little Giant to randythoades. Great guy to deal with, friendly and reliable.[/b]
  19. mikeydee
    Promised pending the paperwork...
  20. mikeydee
    Yes still available
  21. mikeydee
    Bump
  22. mikeydee
    Mini amp bought recently from BC user needing repair of blown power supply capacitors. Completely refurbished with high quality low ESR caps and ready for gigging. Pretty good condition apart form some scratches on the underside and a little ding on the front panel but otherwise great shape. Welcome to come and try it out before buying. Will ship with MyHermes or similar or pick up welcomed. [b] Little Giant 1000 Specifications[/b] Power Output (RMS) 1000W Speaker Outputs 4 Ohms, output power 2 x 500W RMS into 4 Ohms Frequency Response -3dB @ 25Hz and 25kHz High Instrument Input Impedance 10K Ohms, Level 300mV to 20V p-p Low Instrument Input Impedance 1M Ohms, Level 150mV to 10V p-p Line Input Impedance 10K Ohms, Level 0dBu Nominal Line Output Impedance 1K Ohms, Level 0dBu Nominal DI Output 600 Ohms balanced / Level -20dBu nominal Signal to noise Better than 80dB (EQ Flat) EQ Bass +/-15dB @ 100Hz shelving Lo-Mid +/-15dB Frequency 180Hz to 1.6kHz Q = 1 Octave Hi-Mid +/-15dB Frequency 750Hz to 7.5kHz Q = Distortion Less than 0.5% THD H x W x D (mm) 210 x 66 x 310 Weight (kg) 3.5 [attachment=140707:DSCF5885.JPG] [attachment=140708:2013-07-29 13.20.34.jpg] [attachment=140709:2013-07-29 13.20.47.jpg] [attachment=140710:2013-07-29 13.20.26.jpg]
  23. mikeydee
    The speaker cab is now gone although I do have a box of speakers and cabinet hardware now.
  24. mikeydee
    Just bought a couple of faulty ashdown amps from aende and he is a great guy to deal with. Messages very quickly and does exactly what he says he will. Packing was excellent and all went very smoothly. Highly recommended. Mike
  25. mikeydee
    Hi PsycoAndy, can you add a bit more detail on the nature of the fault. When you say farting do you mean ... a continuous loud hum? and . . . If you plug your guitar in do you get any sound coming through the speaker? Or just the farting and . . . If you plug your guitar directly into the power amp; either via the effects return loop socket or if there is a power amp input socket on the back, what do you get Reason I ask is that a while back in a moment of madness I bought an old box of Trace Elliot power amp boards (5 of them) so was thinking that I should be able to cobble something together. Mike
×
×
  • Create New...