KiOgon

Yes, can do a loom for that, PM me 👍

1 hour ago, Soledad said:

I tried using those before (on KiOgon's Jazz harness a while back), wasn't happy as the knob becomes eccentric and it made my head hurt!! (OCD-ish).

I'll ask KiOgon. Thanks for tips.

If you use the wrong knobs, for 1/4" shafts - yes they will go eccentric - but if you use the proper knobs for 6mm shafts the alignment of the screw with the split makes them fit concentric and tight.

Yes, but only because I share my name with that bassy bloke from Dire Straights 😂

Agree with @JohnDaBass above, I have the DP127W in my AVRI '57 P, with GHS Precision flats, have always loved the dynamics, tone range and clarity, wired in series as standard. Never too 'boomy or bassy' 😃 plenty of top end, TBH never tried it in parallel.

Always through my Ashdown LB30/112/48 👍

I sold a P bass loom to Dave, perfect transaction, great comms and instant payment, diamond geezer 👍

Cheerz, John

Sid ordered a VBT loom from me, perfect transaction, good comms and instant payment, a pleasure to deal with.

Cheerz, John

Plucking cat 😁 😺

Simon ordered a Jazz bass VBT loom, perfect transaction, great to deal with, recommended good fella.

Cheerz, John

46

Definitely not normal, idealy - do you have another pair of pickups you can try?

If you can inspect the external solder joints where the pickup wires are and the wires are in tact, the probability is that the coil windings have for some reason been broken/damaged or detached from the solder tags inside.

Sorry, late to the party!

Good advice above and as said the wiring looks OK. Many manufacturers don't or didn't bother with a earth wire to the jack when mounted on a metal control plate, but as Gary - I always do a hardwire earth to every component, it only takes one to become loose and you can loose the continuity.

Testing everything with a multimeter should find the problem/s.

Good luck 😉

If you decide on a new loom, easy option, ☺️ I'm here

Gerry needed another loom 😃, perfect transaction, he's a diamond geezer 👍

Cheerz, John

Pickups are out of phase, swap one pair of wires and try it, or something on the controls is shorting out.

Yes, right here 😄 PM me for details 👍

Lollars in mine - PERFECT IMHO 😍

https://www.lollarguitars.com/lollar-bass-pickups

I made a Jaguar loom for Dave, great guy to deal with, communications spot on and instant payment, perfect!

Cheerz, John

Another loom for Andy, perfect transaction, great guy to deal with, 100% diamond geezer.

Cheerz, John

1 hour ago, Dov65 said:

After two leads made to a certain size using Neutrik ends or better/equivalent. I had some done a while ago but can't remember who it was...cheers

PM coming your way 😉

Jodie got in touch re a change of controls for his Lakland, excellent comms, instant payment and a pleasure to deal with, great guy.

Cheerz, John

I can't imagine why a luthier wouldn't 'just do it' without any talk of 'at your risk', if he's not proficient I'd seek another luthier. Re-doing a bit of copper foil or shielding paint ain't exactly difficult either, IMO 😇

@Obrienp Never seen any blend pots with long mounting thread, (not shaft - that's the bit the knob goes on). The obvious answer is to remove a smidgen of wood inside the cavity where the pot sits, carefully 😉 so more thread sticks through, if you're OK with woodwork handtools, if not see a luthier.

6 hours ago, Little Dragon said:

Could someone show how to change volume/volume to volume/pan please?

There's a easy way, ready to drop in, no soldering and works first time, or you could spend hours trying 😉

Also irrelevant, but I have a Vintage Advance Thinline Tele which is truly superb and punches well above it's price 😉

https://www.worthpoint.com/worthopedia/vintage-advance-av2-thinline-283347013

It's not because they're 'Mini' so much as they're cheaper than chips, in fact potato pots might be better. Penny pinching on electrics by most manufacturers is what lets many basses/guitars down, poxy pots, jacks made out of  putty and soldering by '3 year olds', you'd think! Japanese Fenders included.

I've been using Bourns mini pots for a good few years now in most of my replacement looms and they are as good quality and as well made as the benchmark CTS.

Just to set the record straight like 😉

Alex has had a couple of Jaguar looms, apart from Royal Mail not doing what they're paid for 😒 all is well.

Perfect transactions as always with a great basschatter, pleasure to deal with.

Cheerz, John