fryer
-
Posts
505 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Posts posted by fryer
-
-
-
So a few years ago I bought an Eminence Delta 12A, 400 w at 8 ohm, and made a box for it, as shown. Never used it, so thought I would now build a proper cab for it.
I have some 20 mm ply, and the size I need it to be. It's gonna be vented, and I've asked Eminence for their recommendations on this.
I am seeking suggestions for covering, and grille material.
-
Or I could deliver, or arrange delivery, depending on location.
-
-
is this still for sale ? How old is it ? Why are you selling it ? 4 or 8 ohm ?
-
It's good so far. Still trying different settings
-
I still like 'XTC'
-
-
Just ordered one - should arrive today. Anyone got one ? What's it like ?
-
it just kept clipping when feeding one 500 w cab. Have returned it.
-
looks lovely out in the sunshine
-
what a lovely day for getting the 410 out in the garden and serenading the neighbours.
-
On 25/04/2018 at 21:18, Hellzero said:
If you have the money and the back, go for Glockenklang. I have used their gear, and now I'm playing an AER BassCube, because it's quite light and ultra powerful for broken backs.
Not sure if I'm allowed to advertise, but my Glock 410 is in the for sale section
-
For Sale - EBS Reidmar 750 with RM 4 footswitch.
Current new cost is around £580 plus £75 for the RM4. In as new condition with no marks. Approx. 18 months old and used for maybe 10 gigs plus practising at home.
Selling for £460, as I no longer use it.
FEATURES
Type: Analog Preamp,
D-Class Power Amp
Built-in adjustable Compressor/Limiter
Extremely Powerful 4-band EQ
Drive Control
Effects loop
Character filter.
Balanced XLR-Out with Pre/Post EQ switch and Ground Lift.
Line and Headphones Out
Remote Output for connecting EBS RM-4 footswitch to control Character Filter, Drive, EQ bypass and Mute funtction
Output Power: 750 W @ 4 Ohms
120/230 V Switchable
EBS Reidmar 750
- Input Impedance 1 Mohms / 100 pF
- Gain Range -00 - +30 dB
-
Character Filter Shelving, High/Low Pass,
+7 dB @ 40 Hz, -2 dB @ 800 Hz,+3 dB @ 10 kHz -
Tone Controls,
Bass Shelving +/-18 dB @ 60 Hz
Mid Bandpass Filter 100 – 6000 Hz +/- 12-15 dB
Treble Shelving +/-18 dB @ 6 kHz
Bright Shelving +15/-0 dB @ 10 kHz - Drive min/max 0/34 dB
- Balanced Output -10 dBv, Pre/Post EQ, GND Lift
-
Remotes Output Remote Jack RING = Mute / TIP = Drive
Filter Jack RING = Filter Mode / TIP = Character - Output Power 700 W RMS @ 4 ohms load (350 W RMS @ 8 ohms)
- Dimensions (WxDxH) 15.2 x 10.4 x 3.0” (38.5 x 26.5 x 7.5 cm)
- Weight 3.7 kg (8.2 lbs.)
-
With one 8 ohm cab you only get 130 w. To get the 200 w out of it, you need two 8 ohm cabs. Doesn't that defeat the object of going small ?
-
Never heard of them before, but the reviews are good. Could I have a look / listen ? I could call in on my way home from work.
-
that's good to know, thanks. Which cabs are you using ?
-
I've got it and tried it, and it seams as though it will be ok. Obviously can't tell till next rehearsal.
It's so small I was worried about it flying around on the end of the lead, but luckily it is heavier than it looks.
-
Just ordered one - should arrive tomorrow. I want something small to take to rehearsals. Will be using with a Purple Chilli 1 x 12 cab.
Cab is 8 ohm, so should get 130 w from the amp. Will this be loud enough ?
I normally use a Reidmar 750 with 4 x 10 cab for gigs.
-
- 1
-
nice cheep Christmas pressie ?
-
-
-
I'll put some actual pictures up tonight. Located between Reading and Basingstoke. Can deliver locally.
cabinet build - from scratch
in Build Diaries
Posted
Thank you. I'll try him.