johnbiffa

All PM's replied

Thanks, it certainly has mojo 😎

Interested in possible preamp or cab trades 😉

PM sent

Happy to split if that works for you

As 1 cab is on hold I thought I would list the WJBP1 preamp/DI separately. In excellent condition with original packaging and foot pedal and can be supplied in small flight case at no cost. Notes from Wayne Jones: My perfect sound was an Avalon 737 studio pre through my WJ powered cabs. So I set out to design a bass pre-amp that truly reproduced your bass sound & thus enabled you to tailor your sound. Also the tone controls had to work in the right areas & the pre had to have all the bells & whistles we need to do our job. Again no expense spared, just the highest quality components I could get for everything we need on stage & in the studio. These were my Instructions to my Engineer. I have achieved that with the WJBP This pre will also make front of house engineers happy as what goes in comes out. The WJBP is designed with a no compromise attitude in Cost, Quality, Components & Features just as are WJ High End High Powered Bass Cabinets. Features Input 1/4” phono stereo/mono jack Input Gain For both Passive & Active basses -10 Db pad Input Gain clip Indicator LEDS (top left corner) Tone controls are critically set by Wayne & are extremely accurate in the attack points of each string. You can set them by one for each string on your bass All +15Db -20 Db Incredible separation between the tone controls There is also a 30 Hz boost for those that may like it ( not really needed at all as the Bass control gives such a great bottom end with ultimate attack). In/out button for selection Compressor: Optical, automatically senses & is very effective even with a very small amount engaged. In/out button for selection Balance: This is a balance control for stereo operation e.g. 2 WJ 2x10 or Stereo WJ 1x10 Powered cabs. Master volume Controls output Pre-Amp Output Indicator LEDS (top right corner) tell you if you are overloading the WJBP output Mute - Puts the WJBP in standby mode. LED Indicates when in use. The Mute mode should also be used for power up of the WJ Powered cabs, otherwise a very loud 1000watts will sound when WJ Powered cab (or separate power amp) is turned on. It also operates the built in Tuner. For standard tuning for 4, 5 & 6 string basses Foot switch mutes all output for silent tuning. Master Outs 2 balanced XLR (recommended) outs for connection to WJ powered cabinets or to separate power amps Balance control on from panel will affect these outputs. Also a choice of 2 Unbalanced 1/4" outputs for same function. (not recommended as output is lower) All master outs can be used together as a pair or Individually with balance control set to the respective output FX Send & Return - Stereo or mono Foot switch - Mutes all output DI Output - Balanced XLR out with Level control & ore or post EQ button Aux Input - Stereo input, both 6.3mm & 1/4” phono. You an use this to plug items such as iPad, iPhone backing tracks etc. to play along with. Headphone With Volume Control - Plug in your headphones to practise with. You can use the WJBP by itself without plugging into a power amp. Rack Mount Ears - Included Specifications Input 1/4” Active Unbalanced Impedance 220K Max Level +20dBu Outputs Balanced XLR Impedance 300 Ohm Max Level +27dB 1/4” TRS Unbalanced Max Level +22dB Frequency Response 10 hZ to 20 KHZ THD+Noise@1KHz 2.5 % Signal to noise ratio >80dB Limit 2 Total Gain 62dB Universal Line Voltage 115/240 VAC, 50/60Hz Shipping size 40.5 cm x 32.5 cm x 18 cm Weight 5.9kg Rear Panel Inputs 1/4” & 3.5mm TRS Active Stereo Impedance 20K Max Level +15 dBu EQ Band frequencies: Band 1 20-300Hz, Centre set at 80Hz Band 2 60-1KHz, Centre set at 160 Hz Band 3 150-2.5KHz, Centre set at 500Hz Band 4 450-8KHz, Centre set at 1.6KHz Band 5 1KHz-20KHz Centre set at 5KHz Band 6 Centre set at 10KHz Size 6.6 cm x 30 cm x 24 cm (including knobs) Weight 2.41kg

Possibly interested in Barefaced cabs or Fender Bassman (silver face) rigs in trade

Price Drop for quick sale NOW £975 1978 players grade Musicmaster bass in Olympic White now faded to the classic cream, all original hardware and great player. Old gig bag which works fine included Could be shipped at buyers cost or try and buy near York or potential halfway meet

NOW £625 or Interesting preamp or cab trades invited My home studio speakers used for streaming audio and playing vinyl occasionally. Original boxes and packaging and remote control. Dynaudio Xeo 20, Compact digital active wireless hi-fi in a compact stand-mounted speaker. The 14cm Esotec MSP driver and 28mm Esotec soft-dome tweeter (both packed with legendary Dynaudio tech, including aluminium voice-coils and innovative magnet systems) are each powered by their own 65W digital amplifiers. Each amp is precisely tuned and optimized for the driver it’s powering – giving incredible control over their performance. Can also include Dynaudio heavy speaker stands if collected. Details from review : TECHNICAL SPECIFICATIONS Type: Active two-way ported stand-mount loudspeaker Analogue inputs: Mini-jack, RCA Stereo Digital inputs: Toslink Wireless: 24bit, 96kHz (via optional Dynaudio Connect box) Drive units: 28mm soft dome tweeter, 140mm MSP mid/woofer Crossover: DSP-based, crossing over at 4.7kHz Frequency Response (±3dB): 40Hz–21kHz Amplifier power: 2×65W Class D Finish: Black, white Dimensions (W×H×D): 180 ×320 ×257mm Weight: 6.2kg Price: £1,999 per pair If collected can offer Dynaudio heavy stands to sweeten the travel costs

HUGE PRICE DROP FOR QUICK SALE £575 I am predominantly using IEM and FoH in my Steely Dan tribute band and this incredible rig is not seeing any use, I have 2 cabs and price Inc Preamp (boxed) and 1 cab, needs to be collection or meet up or buyer organises courier. Review by SBL WJBP Bass Guitar Pre-Amp DI Notes from Wayne Jones: My perfect sound was an Avalon 737 studio pre through my WJ powered cabs. So I set out to design a bass pre-amp that truly reproduced your bass sound & thus enabled you to tailor your sound. Also the tone controls had to work in the right areas & the pre had to have all the bells & whistles we need to do our job. Again no expense spared, just the highest quality components I could get for everything we need on stage & in the studio. These were my Instructions to my Engineer. I have achieved that with the WJBP This pre will also make front of house engineers happy as what goes in comes out. The WJBP is designed with a no compromise attitude in Cost, Quality, Components & Features just as are WJ High End High Powered Bass Cabinets. Features Input 1/4” phono stereo/mono jack Input Gain For both Passive & Active basses -10 Db pad Input Gain clip Indicator LEDS (top left corner) Tone controls are critically set by Wayne & are extremely accurate in the attack points of each string. You can set them by one for each string on your bass All +15Db -20 Db Incredible separation between the tone controls There is also a 30 Hz boost for those that may like it ( not really needed at all as the Bass control gives such a great bottom end with ultimate attack). In/out button for selection Compressor: Optical, automatically senses & is very effective even with a very small amount engaged. In/out button for selection Balance: This is a balance control for stereo operation e.g. 2 WJ 2x10 or Stereo WJ 1x10 Powered cabs. Master volume Controls output Pre-Amp Output Indicator LEDS (top right corner) tell you if you are overloading the WJBP output Mute - Puts the WJBP in standby mode. LED Indicates when in use. The Mute mode should also be used for power up of the WJ Powered cabs, otherwise a very loud 1000watts will sound when WJ Powered cab (or separate power amp) is turned on. It also operates the built in Tuner. For standard tuning for 4, 5 & 6 string basses Foot switch mutes all output for silent tuning. Master Outs 2 balanced XLR (recommended) outs for connection to WJ powered cabinets or to separate power amps Balance control on from panel will affect these outputs. Also a choice of 2 Unbalanced 1/4" outputs for same function. (not recommended as output is lower) All master outs can be used together as a pair or Individually with balance control set to the respective output FX Send & Return - Stereo or mono Foot switch - Mutes all output DI Output - Balanced XLR out with Level control & ore or post EQ button Aux Input - Stereo input, both 6.3mm & 1/4” phono. You an use this to plug items such as iPad, iPhone backing tracks etc. to play along with. Headphone With Volume Control - Plug in your headphones to practise with. You can use the WJBP by itself without plugging into a power amp. Rack Mount Ears - Included Specifications Input 1/4” Active Unbalanced Impedance 220K Max Level +20dBu Outputs Balanced XLR Impedance 300 Ohm Max Level +27dB 1/4” TRS Unbalanced Max Level +22dB Frequency Response 10 hZ to 20 KHZ THD+Noise@1KHz 2.5 % Signal to noise ratio >80dB Limit 2 Total Gain 62dB Universal Line Voltage 115/240 VAC, 50/60Hz Shipping size 40.5 cm x 32.5 cm x 18 cm Weight 5.9kg Rear Panel Inputs 1/4” & 3.5mm TRS Active Stereo Impedance 20K Max Level +15 dBu EQ Band frequencies: Band 1 20-300Hz, Centre set at 80Hz Band 2 60-1KHz, Centre set at 160 Hz Band 3 150-2.5KHz, Centre set at 500Hz Band 4 450-8KHz, Centre set at 1.6KHz Band 5 1KHz-20KHz Centre set at 5KHz Band 6 Centre set at 10KHz Size 6.6 cm x 30 cm x 24 cm (including knobs) Weight 2.41kg Cab The WJ 1×10’s Are Extremely light weight (no more back trouble) great for small rooms. 500 Watt a side, 4 ohm cabinets that are used as a pair in stereo or parallel mono. These will blow you away. Ideal for smaller gigs. They are so light but sound so full & clear, 40 Hz- 20 KHz You can also use the powered one by itself as a 500 Watt cabinet. It will only use one side of the power amp which operates totally separate from the other. Besides all that you can pop them up on stands & use them for monitors in your home studio. Digital Dsp For Powered Bass Cabinets Wayne Jones Audio powered bass cabinets now feature DSP input and crossover. The DSP technology used has been developed with our award winning range of Wayne Jones Audio Studio Monitors in conjunction with SoundID Reference from Sonarworks. Cabinet Specs: For a pair Power - 1000 watts. 500 Watts per side into 4 Ohms per side Power Amp - D Class switch mode stereo power amp with heat sink plate mounted into the rear of one cabinet. Power Amp frequency - 20 Hz – 20 KHz High Pass Filter – 30Hz roll off Cabinet tuning – 40 Hz to 20KHz (speakers will reproduce below 30Hz so thus the need for the HPF) Drivers - 2 custom made Wayne Jones 10” drivers with Aluminium cast frames, specially formulated cone pulp, Kevlar impregnated cones. Voice coil – 3” Magnet – Massive Ferrite Tweeter - JBL, 1.75” Voice coil Crossover point – 3.5KHz Control plate – Brushed Stainless Steel Mains Power in- IEC 2 XLR balanced Inputs with parallel mono (link) or stereo selection switch. LED readout for thermal & amp; clip Indication. Attenuators High -12Db cut Mid attenuator -12Db cut @ 300Hz to 600 Hz range Dimensions Height: 47cm Width: 35cm Depth: 52cm Weight Active 18.2kg Passive

PM sent

NOW £25 Simple switcher for 2 basses into I amp or 1 bass into 2 amps Can be run passive or with 9v if you want the blue light to let you know which option you have engaged Price includes postage

The Pedaltrain Nano is the smallest Pedaltrain currently available and perfect for the absolutely bare essentials: a tuner, overdrive and delay. Even guitarists with bigger pedalboards can benefit from a Nano loaded with their most essential pedals so in a pinch you'll never be without your core tone shapers, even if you have to catch a plane to get to the gig! The soft case makes it very light and portable while offering protection to your pedals. Has served me well and is in good condition as is the case, moved up to a Templeaudio board hence reason for selling. Price includes postage

“The 1 SPOT is the original 9V pedalboard power supply that only takes up one spot on an outlet strip or wall outlet. It solves an annoying problem that people have complained about for years, and does so with quiet, reliable performance” – Truetone FEATURES: -Handles up to 1700mA draw -Triple filtered output for clean, quiet power -Heavy-duty output cable. -Use with optional multi-plug cable(s) for powering more than one pedal. -With optional converter plugs, the 1 SPOT will work with virtually any 9V pedal -Converts international voltage (100V-240V) automatically -3m cable Will be supplied with numerous cables for daisy chaining Price includes postage in UK

Preamplifier Fodera model 2000 bass preamp This is the rare pedal version of the Fodera/Pope Preamp which was installed inside the original famous fodera custom basses, with the additional feature of a volume level control and the possibility to switch the boost/cut control on/off of the midrange control. I have been using with my Fodera passive P Bass and I used it to balance the sound with my active Fodera Emporer and it works really great for this purpose! In this way you can use an hi-end bass with a very high signal, and immediately embrace a passive instrument without having to go crazy to change the equalization of your amplifier. The volume control has enough headroom to drive a power amp! It runs on 2x9v batteries and is not power hungry as long as the input jack is not engaged when not in use 1 Excellent preamp, I sell only because I am using a Kemper Player live and am managing the output volume in the amp profile so it is now surplus, PRICE INCLUDED SHIPPING in UK or can be collected

PM sent again

Still available?

Great useful pedal from trustworthy bass chatter 😎

Taking sensible offers before its withdrawn and placed on the dreaded Ebay/Reverb Bargain particularly for recording but great in a live setting !!!!!!

Much more functionality than your average Stomp guys and will look great racked in your home or studio set up 😎 make an offer, you never know and it includes all original packaging and latest software 👍

Any interesting trades ?

Great condition but no longer needed