PaulThePlug

February 8

No... but look intriguing especially for the £... plus options they offer. The noise cancel may be a winner in a studio or of ya like things brighter

I'd contact em direct and see whats what.

February 7

Lightweight and Portable Ampeg, DI out, Cheap... Behringer BDI21, Zoom B1 On ( or Four)

February 7

I'd go Med/Fine Sanding Sponge... Fine Sanding Sponge... I've also used Halfords Bodywork Sponges.

Steady Eddie otherwise you get a 'Scallop' as well as a 'Rolled' edge...

But a bit of the both looks kinda nice.

Then on to the nail blocks... got a load from Aliexpress... great for a fretboard and fret clean.

Also used to knock-off a sticky glossy neck, and great with wax on a wood body.

February 7

Bloodstone?

https://www.ebay.co.uk/itm/166394234237

https://www.ebay.co.uk/itm/164244335726

February 7

Infected - The The

February 7

Kent Armstong Vintage Alnico V 5's at £67 a pop... I'd drop em a line see if they have any B stock or discount... Try 'em @ £100 the pair... Ha! - or Wilkinson Alnico V at half the price.

Why not adsemble a replacement bell plate with VBT loom and a Pure Tone Jack?

Got KA Vintage 4's in my J -PJ Custom Bitsa...

Aria J RHesq J-PJ Entwistles...

Need a pic if yours - dem da rules

February 7

Evri Breath You Take - Police

February 7

Great intro post... welcome.

40 ya say... nearest anyone on here gets to 40 is a speed limit!

Looking at the Basses, You clearly Know ya Onions... More Pics Please!

(There is a Build Diary thread if you have any old pics of when you put em together)

February 6

Luverly take on a Compensated Bridge Saddle Blade...

Shorter Screws for Intonation and Height... I'd hack saw 5mm or so off, or replacements from somewhere like Spaldings Fasteners on the 'bay - I use em for A2 Stainless Grub Screws for bridge saddles.

February 6

Hard to cut the inside hole neat... which is why the pre-cut packing foam was ideal...

February 6

Just a little tidy up rubber bung for spare no longer used control holes.

https://www.ebay.co.uk/itm/285510757363 A=8.5mm

February 6

@TheGreek thanks for responding...

The packing foam sponge from a pair of Jazz Pickups... I can cut into 2 to make a foam sponge surround for each pickup in the existing Soap Bar Cavity of my SR400/DiMarzio.

j-bass-2.jpg.718a8ca51a84e443bb5a21ed13b0d372.jpg

Here is the Red Fender Foam in my SR300/Maida Vale

Protect the wires and keep the dust and crud out. Just an easy finishing touch.

Thanks for looking...

February 6

https://a.aliexpress.com/_EvLiT2H

February 5

Hello.. me again!...

Please have a look... just to shut me up!

February 5

Son's sounds good with a Fuzz 'n Phaser or Fuzz 'n Wah...

Another trick is hanging a coat hanger if a bass note as a Drone, leaving both hands to play over it.

February 5

Son has an Alesis Recital

88 Full Size and Semi-Weighted Keys...

Have a look on Faceache or Gumtree see whats local... £100ish will 'prolly come with stand / seat, maybe even sustain pedal...

Or a Midi Controller?

February 5

February 4

Let's Twist Again - Chubby Fella...

February 4

Gonna think out a Parallel or Stereo Split after the B1Xon in to the 2x B1on...

February 4

Zoom B1on and B1xon ya say? Might of over-done it!

Maybe work out a Split from the B1xon Out to the 2 B1on units In for Parallel...

But, still not got to the bottom of this...

On/Off Switch - Button functions on a finger press, but the foam doesn't seem to want to compress with a push with the pedal - Note: I am Mechanically Sympathetic so ain't gonna be stamping on it..

Switch turns On/Off the Effect to which the Expression Pedal has been assigned to one of it's paramaters...

Rather than turn On/Off the Expression Pedal's Variability, say back to a default setting... Shame.