Been a while since I've posted one of these!
Hey everyone, could do with a bit of help. Yesterday I decided to re-wire my Jackson bass with a 3 way mini toggle on each of the EMG 35HZ pickups so that I had series/parallel/split options. Found a diagram online and after doing a bit of research found that EMG use the same colour coding as Dimarzio for their passive HZ pickups but when I wired them up, the bridge pickup worked as it should & the neck pickup just didn't work.
I wired both pickups in the exact same way so I don't know if I've made a simple mistake or if I've really balls'd it up!
This is the diagram I used:
As said, the bridge pickup works fine and the switch works fine for that one (the output is a bit low but that could be down to my dead strings) but the neck pickup doesn't work. There's a very faint signal from the neck pickup so I know the pickup and wires aren't dead, I've obviously just made a mistake somewhere. The switch is passing signal too so it's not a broken/faulty switch.
Any help would be greatly appreciated, especially as I have a gig on Friday and would like to use the bass but if not, I'll use my 5 string.