Jump to content
Why become a member? ×

eubassix

⭐Supporting Member⭐
  • Posts

    3,039
  • Joined

  • Last visited

Posts posted by eubassix

  1. Ashdown Spyder 330 Dual Tube Pre Amp Bass Head. Condition is Used / refurbished. Driven by 2 pre amp tubes, sounds really good, mid and bass shift switches to provide a variety of tones. Overall controls: L + H imputs; FX send-return; [ROTARY] Middle, Bass, Treble, Gain, Master; [SWITCHES] Mid, Bass, Bright, Mute, Pre/Post; Ashdown VU Meter. (Rear : DI + 2x  speakers.This was in a bit of a state (aesthetically only), so have simply refurbished the chassis using hardwearing 'plastidip' (black, plastic paint) and fitted new corner protectors. Will be packaged very well/carefully for Courier (24/48h).

    MVC-793S.JPG

     

     

     

     

     

     

     

  2. 15 inch bass speaker. Excellent used condition. Make unknown. c. 14cm (5.5") overall depth. Large magnet construction of c.7.5" (19cm) diameter. 8ohms power unknown but would estimate 300 watts (used previously with 330w head w/out issues). Includes a FANE J.73 (made in Japan) Horn (c. 18.5 x 7.5 cm and c. 16cm deep). Plus 2x interconnected jack sockets and original wiring (split for removal but could be re-joined) Ideal for bass unit - this is where it was removed from previously. Local pick up preferred but I can get a Courier quote if required or meet-up relatively locally.

    MVC-025S.JPG

     

     

     

     

  3. Ashdown AAA After-8 Bass Combo.Excellent condition (see photos), although I've had to add some black tape to one end of the rubber strap which was wearing against the fitting + the inner metal strip; probably a common issue - very little used (home only). Great little unit for practice+. Happy to arrange Courier if required.

    MVC-088S.JPG

     

     

     

     

     

  4. Thanks to the invaluable assistance of KiOgon (John), my Tao J bass now has an excellent set of Bourns mini pots c/w  VVT with S/P on the tone pot (no batttery) with Standard Jack. The original owner had seriously cut/shortened the wires on the SD Hot Stack (STK-J2) pickups, so John also created a link-loom to facilitate easier, solderless connection/s. Highly recommended - John's messages/photos/diagrams were very clear, helpful and explanatory, and the unit(s) arrived really quickly.

    • Thanks 1
  5. 14 hours ago, Ruarl said:

    Nice looking bass. I love a holly top. And that fingerboard wood is lovely too.
    Where is the instrument at the moment? Is the ramp flat or radiused to match the fretboard? Does that bridge require double ball-ends? Or can it take regular strings cut short?

    Thanks Ruarl  -  instrument is with me, in the north-east of England  -  ramp is flat (but the f/board is only slighly radiused & string heights quite level over the ramp)  -  bridge & 'nut/headstock' will take both DBE and standard strings. If you look closely at the last photo you can see the channels and small hex-(clamp)-bolts above the current dbe strings.

    • Like 1
  6. ACG (UK) Salace Headless 5: Custom (Specification Level). Top/Back Wood: Holly top with Bloodwood accent; Body Wood: Black Walnut; Body Finish: Satin Lacquer; Neck Wood: 5 piece Wenge/Bloodwood; Finger Board: AI Birdseye Maple; Scale: 34″; Neck Finish: Satin Lacquer; Pickups: ACG RFB ACG PB in Bloodwood ramp; Hardware: ETS Bridge/Tuning unit, ACG Headpiece Dunlop Straplocks; Pre-amp: ACG EQ03 5K filter pre. Exceptional instrument in really excellent condition (see photos). c/w Blake-Apex semi-solid case (designed for guitar/s but works well for this headless bass with an overall length of c. 100cm or 39"). Narrow(er) string spacing of 16.5, although the saddles are adjustable. @ nut/zero-fret: c 9mm). Initial photos show bass as-is, with a small dark cover (25mm) over the gold-sovereign designated by the original owner (this is recessed/flush with body top). Also a photo(s) with coin w/out cover. The coin itself has a value of £340-550 (conditional) but is pretty much impossible to remove w/out damage to bass, coin or both. Exceptional bass acquired via BC trade but I can't adjust to the narrow string spacing & frustrated in being unable to unmodify the personalised modification.      https://www.acguitars.co.uk/project/093salaceheadless5/   £1234

    MVC-094S.JPG

     

     

     

     

     

     

     

    • Like 10
  7. On 05/02/2021 at 19:29, BCH said:

    I have the Scott Dixon single 10" ...fabulous 

    Thanks BCH - do you have a photo you could add? I don't think many players have seen or experienced these cabs. The site appears to be under redevelopment currently, but I have details of the range from the old site:-

    SDBC110 1x10   -   Price: £695   -   Made In: UK   -   Power: 360   -   Cabinet Materials: Aircraft-Grade Aluminium   -   Impedance: 4ohm   -   Frequency Response 40-2500Hz   -   Speakers: Celestion BN10 300s + CDX1 1730 Compression Driver   -   Connections: Speakon + Speakon Jack   -   Controls: Horn Attenuator   -   Dimensions:   -   Weight: 11kg (with lid)

    SDBC112 1x12   -   Price: £695   -   Made In: UK   -   Power: 360   -   Cabinet Materials: Aircraft-Grade Aluminium   -   Impedance: 4ohm   -   Frequency Response: 50-4000Hz   -   Speakers: Celestion BN12 300s + CDX1 1730 Compression Driver   -   Connections: Speakon + Speakon Jack   -   Controls: Horn Attenuator   -   Dimensions: 43cm x 52cm x 50cm (with lid)   -   Weight: 13kg (with lid)

    SDBC210 2x10  -   Made In: UK   -   Power: 600   -   Cabinet Materials: Aircraft-Grade Aluminium   -   Impedance: 8ohm   -   Frequency Response: 40-2500Hz   -   Speakers: 2 x Celestion BN10 300s   -   (also available with Compression Driver + Horn Attenuator @ £849)   -   Price: £795   -   Connections: Speakon + Speakon Jack   -   Dimensions: 45cm x 33cm 60cm (with lid)   -   Weight: 14kg (with lid)

  8. Seymour Duncan AJJ-2 LIGHTNIN' RODS SET JAZZ BASS c/w VVT pre wired Control plate complete with VVT pre-wired control plate (3-pots/wired) – so just need a battery and to (re) solder-in the 2 pickups and battery leads (I can supply photos if required). Pickups (only) are c. £200 – this set is in excellent condition and comes complete with all required for a drop-in upgrade to any Jazz bass. Includes P&P (delivery).

    MVC-035S.JPG

     

     

     

     

     

     

     

  9. Roscoe Guitars (USA) Double Electric Bass Gig Bag. Good overall condition (see photos) with some minor scuffing due to occasional use. Ideal for 2 Roscoe basses, but good size for any 2 instruments. Excellent padding around the edges and a thick finished-foam barrier between the 2 basses. Includes 24-48H Courier delivery.

    MVC-024S.JPG

     

     

     

     

     

     

  10. Happy to commence this FB thread for Theo (TJ1) who recently bought my Hartke HD50. Pleasant and prompt communication throughout. Easy transaction - recommended to BC'ers.

  11. Hartke HD50 Bass Combo:- ... "Hartke designed their signature hybrid (half aluminium, half paper) speaker to reproduce a warm low-end tone while still offering trebles with plenty of punch. The HD series specifically was made to offer quality audio from an amp with a super-long lifespan. This combo features a 10-inch speaker and a 50W amp, easily used during rehearsals, and also great for practising at home: plug your CD or MP3 player in via the AUX input so you can play along with your favourite tunes. Like any good practise amp you'll find a headphone jack as well...." In excellent condition (photos). Current new price looks to be c. £225. Due to size/weight. should go via UPS 24h drop-off, so only about £10. Connectors Aux-in, Headphone Number of speakers 1 Amp modelling no Bass reflex port yes Effects loop no Weight: 14kg 41 x 45 x 31cm

    MVC-202S.JPG

    MVC-199S.JPG

     

     

     

     

     

  12. I received a 48h offer, with a £2550 reduction (?!) ... but still overpriced ..... :-

    VERY RARE 2013 Fender Pawn Shop Mustang Bass in Olympic White WIT...

    Item ID: 164625881969

    Buy it now price: £3,500.00

    Your offer: £950.00

    Offer expires: 07-Jan 14:59:53 GMT

    Seller: robgraynineteen99(446)

  13. Sung-IL (made in S. Korea) High mass 4-string Bass Bridge (Chrome) - used but good/clean condition (see photos). A versatile bass bridge, fitted as standard by some manufacturers. The bridge has independently adjustable and lockable saddles, allowing the required height and intonation to be set correctly and locked for each string. Spacing shown in photos. Base is 92 x 52mm. Weight is 220g (cf. std Fender BBOT @ 100g). Model BB104 (current models appears similar and is BB404). Quick release slot-in string access. Includes postage

     

     

    MVC-161S.JPG

     

    • Like 1
  14. Digitech X-Series ‘BASS’ Multi Voice Chorus Pedal - in excellent condition, and comes in original box/packaging and with brochure/manual etc.. The knobs have been replaced as one of the originals was missing and it's proved impossible to get a new one (UK distributor does not even reply!).  Delivery included.

    MVC-111S.JPG

    MVC-110S.JPG

     

     

     

     

     

     

     

     

    MVC-118S.JPG

×
×
  • Create New...