Kraken Posted August 6, 2010 Share Posted August 6, 2010 I bought a PBDDI to use as a switch between Basses and as a decent Preamp before I got my SVT4. I've now set the Graphic on the SVT4 to be footswitchable and using that to select between the basses and as I'm using the FX loop on the Amp using the DI on the back of the head. beyond using it as a preamp again when I don't get to use my own amp (which does still happen occasionally) how would you folks recomment I use my PBDDI now? and what settings would you recommend? thanks Quote Link to comment Share on other sites More sharing options...
M4L666 Posted August 6, 2010 Share Posted August 6, 2010 If your EQ needs are covered, have different drive settings, one clean, one dirty and one distorted or something like that? Quote Link to comment Share on other sites More sharing options...
escholl Posted August 6, 2010 Share Posted August 6, 2010 [quote name='M4L666' post='916936' date='Aug 6 2010, 01:20 PM']have different drive settings, one clean, one dirty and one distorted or something like that[/quote] this. Quote Link to comment Share on other sites More sharing options...
Dood Posted August 6, 2010 Share Posted August 6, 2010 My paradriver is redundant!! lolz! - I would however use it as suggested above! - Use it to add more drive / dirty to your signal, like a distortion pedal, Quote Link to comment Share on other sites More sharing options...
Dood Posted August 6, 2010 Share Posted August 6, 2010 Sorry - my bad, you were referring to the programmable BDDI! Not the ParaDriver.. must pay more attention! lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.