Logo position on headless bass

[RonC]

Hi all, 

I’m building a headless bass at the moment (fretless 5 string) and can’t decide the best spot for the logo. 

I’m gonna place it as an inlay on the fretboard but I doubt between the position at the 12th fret or after the 24th.

Because it’s a 5 string, one string will run through the middle. I’m gonna use black strings.

What looks best?

(Build diary will follow when it’s finished!)

[Mediocre Polymath]

I think the convention that was settled on in the 80s is that the logo goes on the body, parallel to the centreline and either close to or directly above the fingerboard. As ony Honher

 

 

I think Washburn, Steinberger, Status and Ibanez put theirs in the same place.

 

Not saying you have to, but that seems to be the convention.

 

[RonC]

Thought about that too but I really like the contrast between ebony and maple.

[Mediocre Polymath]

31 minutes ago, RonC said:

Thought about that too but I really like the contrast between ebony and maple.

Personally, my inclination would be to do both. If you have the inlay jigs, you may as well do it at the 12th fret and on the body.

[RonC]

It’s sure is a possibility but wouldn’t  that be an overkill? 

[Pea Turgh]

My vote would be for the body end of the fretboard- not seen one like it and it sits nicely.

[Hellzero]

There is also this possibility or on the treble side...

 

[Hellzero]

Like this...

 

[RonC]

Thanks you all for the suggestions, Most likely it will be the end of the fretboard. I'm not fond of placement on the body, everybody else allready does that.

The advantage to place it above the 24th might be that the string movement is bigger while playing so the middel string won't cover the middle part of the logo all the time..   

Before i'l make the final decision i'll put the strings on!  

[SpondonBassed]

9 hours ago, RonC said:

Thanks you all for the suggestions, Most likely it will be the end of the fretboard. I'm not fond of placement on the body, everybody else allready does that.

The advantage to place it above the 24th might be that the string movement is bigger while playing so the middel string won't cover the middle part of the logo all the time..   

Before i'l make the final decision i'll put the strings on!  

 

Both of @Hellzero's suggestions seems good to me.