EJWW Posted Sunday at 10:55 Posted Sunday at 10:55 When using the DI out on my LM4 can anyone advice me what to do with the 'Line Out' control on the front panel? I've not had this head for long and don't recall previous amps having this control so I don't know how high or low to set it. At last night's gig I left it set at 12 o'clock and there were no complaints... Quote
HeadlessBassist Posted Sunday at 11:16 Posted Sunday at 11:16 I also leave the line out at about 12 o'clock - whoever is doing the PA will set the levels accordingly. Perhaps the more important setting to you is on the back of the amplifier - the Pre/Post control for the EQ will flavour what you send out to the PA - depends on if you want to send out a flat or eq'd signal. 1 Quote
fretmeister Posted Sunday at 16:26 Posted Sunday at 16:26 It’s kind of up to the FOH guy. Usually as high as you can get it without overloading the PA desk. Once you’ve run your DI cable to the PA get whoever is on the faders to tell you if they want more or less. Quote
40hz Posted 5 hours ago Posted 5 hours ago When I had mine, I used to set it at 12 O'clock. Never any issues with levels/gain through our PA, or others, doing so. 1 Quote
simonlittle Posted 1 hour ago Posted 1 hour ago 12 o’clock does seems to be the standard move with all Markbass amps and FOH engineers are usually happy with the level they get from that. Most venues that have Markbass gear in-house will already have their line out pre-set to 12 so it must be a decent signal level at that setting Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.