K&K twin transducer

[lowlandtrees]

I got one of these years ago and was thinking of going back to it. Problem was that the poles just didn’t stick. I used the best double sided tape I could find to no avail. Maybe didn’t get the old tape off? Anyone solved this…assume that it’s not only me that has had this problem.

 

i use a bass max as well incidentally, which I’m pleased with although I still feel it’s a bit ebassy.

 

 

[Beer of the Bass]

If both surfaces are flat and clean, 3M 467 double sided adhesive sheet should do the job, it's the stuff often used to apply pickguards to acoustic guitars. 

The K&K guitar systems (using similar discs inside the guitar) are usually applied using a drop of gel superglue, which is not as drastic as it sounds - provided you don't use an excess amount it can usually be popped off again by prising it with a single edged razor blade.