Jump to content
Why become a member? ×

Recommended Posts

Posted

Hi guys!

 

Anyone know if this bridge will fit a sterling sub series?

 

I just found this on AliExpress: 
£23.32 | Guyker 4 String Bass Bridge With Vintage Machined Brass Saddles Tailpiece Replacement
https://a.aliexpress.com/_EyGFvw6

Posted

Maybe - but the hole pattern is wrong - the Sterling bridge has three holes along the bottom and two on the outside edges of the plate.  The three in the middle *might* line up OK, but even if that happens you'd have two redundant holes in the plate left and right, and you'd either have to ignore them and hope that three screws is enough, or drill new holes for the first and fifth holes.

 

Definitely not a direct replacement.

Posted (edited)

It also doesn't look wide enough to cover the two existing outer holes so they may be visible if you fit it. Guyker hardware usually has proper diagram showing the dimensions and screw pitch etc, check other listings to see if they include it or message Guyker themselves. Looks like a nice bridge though. EDIT some here:

S443b9ef3ad4047208729cac2f4194005O.jpg

 

 

 

 

 

 

 

This one might be a better fit:

https://www.aliexpress.com/item/1005009638519208.html

 

Measurements here:

S54bb19a2208c493c9e5a5da63b6980762.jpg

Edited by lemmywinks
  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...