Guyker bridge

[Craigster]

Hi guys!

 

Anyone know if this bridge will fit a sterling sub series?

 

I just found this on AliExpress: 
￡23.32 | Guyker 4 String Bass Bridge With Vintage Machined Brass Saddles Tailpiece Replacement
https://a.aliexpress.com/_EyGFvw6

[neepheid]

Maybe - but the hole pattern is wrong - the Sterling bridge has three holes along the bottom and two on the outside edges of the plate.  The three in the middle *might* line up OK, but even if that happens you'd have two redundant holes in the plate left and right, and you'd either have to ignore them and hope that three screws is enough, or drill new holes for the first and fifth holes.

 

Definitely not a direct replacement.

[lemmywinks]

It also doesn't look wide enough to cover the two existing outer holes so they may be visible if you fit it. Guyker hardware usually has proper diagram showing the dimensions and screw pitch etc, check other listings to see if they include it or message Guyker themselves. Looks like a nice bridge though. EDIT some here:

 

 

 

 

 

 

 

This one might be a better fit:

https://www.aliexpress.com/item/1005009638519208.html

 

Measurements here:

Edited 16 minutes ago by lemmywinks