Quilter V803 - Speaker Question

[Freddi375]

Hello guys 

 

Does anyone know if I can run an 8ohm and a 4ohm (2 seperate cabs) together and safely using the Quilter V803?

 

...and if I do this, do i need to ensure something is changed on the amp for this to work, or will it do it automatically, ie do i leave the watts tuner at 800?

 

Thanks in advance!

 

Freddie 👍 

[Jakester]

The specs say 8 or 4ohm - I'd assume therefore it's minimum 4ohm. Using an 8ohm and a 4ohm cab at the same time would potentially take you below that to 2.67ohm, which I suspect it won't like.

[chris_b]

There's an Aguilar AG700 in the Classifieds which will run at 2.67 ohms. Great sounding amp.

[Bill Fitzmaurice]

2 hours ago, Freddi375 said:

Does anyone know if I can run an 8ohm and a 4ohm (2 seperate cabs) together 

There's only one case where that makes sense, that's when you have a 2x that's 8 ohms and a 4x that's 4 ohms, with all six drivers being identical, and the amp is rated for 2 ohm operation. Otherwise go with the one cab that gives the better results. 

Edited 16 hours ago by Bill Fitzmaurice