What Sire did next, 2025 edition

[BaggyMan]

Here you go, just received a M6-5 stringer.

 

Pre amp is the heritage model pretty much one everything they make except the Z3.  Bass response is huge, possibly down to the pickup pairing,  lots of headroom.  18V

Knobs are the ones that appeared when the Z series was launched.  Better than pure plastic ones i guess.

String spacing is 17 to 17.5mm (best i could measure and guess...dont judge)

Stanless steel frets.

Three switches.  Admittedly I havent looked too hard yet to find out what they do. 

One is pre amp on/off

Other two?  series/parallel/single per pickup (three way) as far as i can tell.  Info is that readily available except AI generated boll0cks. 

Scale lengths are:

B  35 1/4

E  34 3/4

A 34 1/2

D 33 3/4

G 33

String are ball end at the bridge and clamped by two quite small allen s at the 'stump' (unlike my Cort space 5 which has one larger allen bolt and one smaller per string.)

 

5 piece neck.

Finish feels almost plastic like.  not bad, but different.

 

 

 

 

 

[ossyrocks]

On 21/09/2025 at 14:38, ossyrocks said:

Well, those who know me will find this surprising.....

 

I just ordered a Sire bass ! 

 

This is the one, a P5R in natural - https://www.thomann.co.uk/marcus_miller_p5r_alder_4_nt.htm

 

It will mainly be for jams and to carry as a spare on gigs. Fingers crossed it's not too heavy.

 

Rob

 

It arrived today from Thomann. The packaging wasn't great, I do a lot better job myself when posting a bass. However, it has arrived unscathed, but I think that was more luck than good packing.

 

Fit and finish is good, it's not too heavy, 9 lbs 2 oz, or 4.14kg. The action was high in my opinion, but the first thing I did was set it up.

 

I put a set of La Bella Low Tension Flats on it, then it needed a good tweak of the truss rod, and intonation and bridge saddle height. It's now got a low action and is playing well.

The neck is great, very much like an early 70's Precision, the fingerboard has soft rolled edges and the fret ends are well dressed. It's a good bass to play.

 

Sound wise, it is brighter than I expected, even with the flats, and when compared to a vintage P bass, it does sound thinner. I'll have to see how that pans out.

 

Does anyone know if the wiring is standard, as per the Fender P bass diagram? I'm wondering if a change of cap value is all it needs.

 

Rob

 

Rob.

[Lozz196]

Could be cap or possibly pots - Squier use 500s which are brighter, changing them to 250s sorts things out nicely, maybe Sire do similar?