New BassChat 8"Cab design

[rwillett]

24 minutes ago, Richard R said:

 The black is cool, but I have to admit I liked the red Lego look.

Agreed, I did like the Lego look, but the black is cooler. 

[JohnDaBass]

1 hour ago, Richard R said:

 The black is cool, but I have to admit I liked the red Lego look.

Black is cool, Henry Ford got it right 👍 

[Stub Mandrel]

They look excellent Rob.

[rwillett]

They sound quite nice as well. I've had zero chance to wind them up due to various things, it'll probably be the weekend before I can try. 

[Chienmortbb]

I am sure that I saw somewhere that you can get two of these from a half sheet 1220 x 1220, Is this correct?

[rwillett]

I think I had a full sheet cut into four, one is going to be a sprayt booth, I built two cabs and I have one quarter uncut, so I could make a 3rd 8" speaker OR a 6" House Jam or I could just leave it in the garage to rot away

 

So I think 1220 x 1220 is half a 8" x 4" ft sheet so you should get two out of them. 

 

If you do cut them yourself, then I would change one or two dimensions by 2mm or so. It makes zero difference to the volume but makes cutting a little easier. There's something on this in the thread where I discussed it. Basically make the sides 276mm wide rather than 274mm wide, and the top/bottom 276mm rather than 274mm. This extra 2mm should be at the front of the cab and so the volume doesn't change but the 'lip' sticks out 2mm longer.  Just easier to cut and thats the only difference. You get an extra 2mm to drop a grill in as well, but thats negligible. My second cab is cut that way from memory,