spongebob Posted July 4, 2021 Share Posted July 4, 2021 I've been looking online for a decent walk though of how to change a MIA P bass pickguard. Can't find a decent one.....any suggestions? I'm a total novice at this, and as such, I'm a bit worried about the power socket, etc. Don't want to break anything! Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted July 4, 2021 Share Posted July 4, 2021 (edited) You won’t break anything, you remove the knobs and just unscrew the nuts on the top to the jack and pots , put them to one side, and place your new guard on and re-screw the nuts and washers , then just pinch them up with a small spanner or pliers 🙂 Edited July 4, 2021 by Reggaebass 1 Quote Link to comment Share on other sites More sharing options...
Delberthot Posted July 4, 2021 Share Posted July 4, 2021 I always hold onto the pot/jack underneath while I am undoing the corresponding nut in case the whole thing turns and loosens one of the wires. Same applies when I'm putting it back together 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.