Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Recording, impedance, Boss pedals and DI boxes


wintoid
 Share

Recommended Posts

I've been a bedroom player for a long time, and am turning my thoughts to recording my bass for the first time.  I have a reasonable setup, using Bitwig as my DAW of choice (love it), and an RME Babyface Pro FS as my audio interface.  The Babyface is supposed to have HiZ jack inputs for instruments, rated at 470 KOhm, but they seem to record a bit quiet.  I read that DI boxes are supposed to put out 1 MOhm, and was thinking that might solve the volume issue and improve the general quality, but I also read that Boss pedals all put out 1 MOhm, so I thought one possibility would be to get something like a Boss limiter, and that would give me real control over the volume hitting my DAW.  I'm not sure whether it's considered bad practice to record the bass post-effects, even if it's only a limiter.

I'd be really interested to hear any thoughts from those far more experienced than me!

Link to comment
Share on other sites

50 minutes ago, wintoid said:

...I'd be really interested to hear any thoughts from those far more experienced than me!

Sorry, but this is not going to help you that much; I'll just describe how I record stuff with Reaper.
I don't worry too much about the input level in absolute terms, as long as I'm seeing a decent signal on my on-screen graphics. Different instruments, and different ways of playing can produce different levels, and any imported samples or clips will have their own levels. Before mixing, however, I usually 'normalise' all tracks, which makes them 'compatible', each having the same peak level (can be 0db; I usually prefer a bit less, so normalise to -3 or -6 db...). In the past, with analogue, tape systems, this could increase background noise (tape hiss and the like...), but with modern 24-bit recording, this is, in my view, a thing of the past. I prefer recording more on the low side, then normalising, rather than recording 'hot'.
I'd recommend trying this with your system, except that, in looking through the features of Bitwig, it would appear that they (deliberately..?) don't offer a 'Normalise' treatment..! Seems odd to me, and they doubtless have their reasons, but I'd be a bit stuck without it for mixing tracks with disparate levels. Still, that's how I deal with low input levels. To me, they're preferable to 'hot' levels (within reason, of course..!). As stated, this might not help much, but that's how I deal with things. There's nothing wrong with your interface; it's fine. B|

  • Like 1
Link to comment
Share on other sites

Your Babyface should be absolutely fine to record bass using the Hi-Z inputs, I've done in loads with an RME Fireface and passive bass. I don't have an RME soundcard with me at the moment, and i'm not sure if it's the same for the Babyface, but there is a software adjustable option in the RME software to switch the inputs between Hi Gain/+4dB/-10dB. This might be worth a look? I've certainly been able to easily hit clipping on the input level with a passive bass on the Fireface.

As Dad3353 says above, these days it's not as crucial to light up the meters if you're recording digital at 24bit, in fact it's good to leave space. Peak level during recording of around -12dB is fine.

Surprised by the lack of a Normalise function on your DAW, it's very common. Might be called something else though...

  • Like 1
Link to comment
Share on other sites

20 minutes ago, TwoTimesBass said:

...Surprised by the lack of a Normalise function on your DAW, it's very common. Might be called something else though...

S'what I thought, but I read through their doc a few times; no mention. On their forums, it's been requested as a 'feature', but it's not been taken up. Seems odd to me, too, but it's maybe a DAW for doing other stuff, really..? B|

  • Like 1
Link to comment
Share on other sites

Thanks guys.  You're right, Bitwig is a strange fish.  I love it!  It's absolutely geared towards someone who's interested in synthesis (me) and much less towards someone who wants to work heavily with audio (unfortunately now also me!).

From memory, I switched the inputs from +4 dB to -10 dB and it was louder that way, but still pretty quiet.  I'll have to do some fiddling around to see how to switch from line to instrument, which sounds like it might be the issue, but I don't find RME TotalMix very simple to use, so I could easily have overlooked this.

Link to comment
Share on other sites

OK I checked and TotalMix has a little symbol of a guitar over the input into which I plug my bass, so I'm going to assume that I'm successfully using "instrument mode".  However, unlike @TwoTimesBass I am nowhere near hitting clipping with everything maxxed out and an active bass.

Edited by wintoid
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...