Jump to content
eubassix

sold:2xARTECSE3:3-band5-potActiveBassEQpre-amp
£32
TS

Recommended Posts

Posted (edited)

Artec SE3 (band EQ) features a pre-wired balance control and master volume, Bass and treble on separate potentiometers with the mid band control on SMT PCB. I have TWO of these - one fitted briefly; the other as-new (£32.10 incl. for the new one + the 'used' one - see photos, all fittings/connections are fine, just less-than-perfect amount/shape of solder on the solder points). Each control pot designed to connect to PCB by connectors, which make SE3 installation easier. All you have to do is solder connection to pickup, output jack, ground and battery clip* (*included). High Impedance Input design matches with any Active and Passive Pickup. And also Low Impedance Output will keep the same tone from your guitar to any amplifier system without losing high frequency response.. Using advanced Surface Mount Technology could reduce unwanted sounds (Noise) while increasing sound quality and it's reliability. ARTEC guarantees a virtually noiseless sound with long 9 V battery life (more than 2000 hours in continuous use. - workable voltage : drop down to 2.2 V). Technical Specifications : Bass : +/-12 dB at 80 Hz, Middle : +/-12 dB at 800 Hz Treble : +/-12 dB at 4 kHz, Balance : MN500K Potentiometer. Current : 0.32 mA Voltage range : 6 V ~ 22 v Battery : 9 V Alkaline SE3 ....Features : - 5 individual pots - Balance,Treble, Middle, Bass, Volume, - Battery clip

http//www.artecsound.com/pickups/electronics/se3.html  (shows fitting etc.)

MVC-074S.JPG

 

 

 

 

 

 

 

 

Edited by eubassix
error; sold + sold

Share this post


Link to post
Share on other sites

update: used unit sold elsewhere, so (as I cannot alter price) OK for offers on the new EQ

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.



×
×
  • Create New...