Jump to content
Why become a member? ×

Pup upgrade for Tanglewater Jazz


lownote
 Share

Recommended Posts

Hi
Got a Tanglewater Classic Jazz and would be grateful for thoughts on a pickup and if necessary electrics upgrade. All help gratefully received, but it would be especially handy to hear from anyone who's been down this road.

Edited by lownote12
Link to comment
Share on other sites

Check out the thread about Entwistle pickups. A few people on there have put then in the Tanglewater classic jazz: http://basschat.co.uk/topic/235314-entwistle-bass-pickups/

I've got a classic jazz, and have a pair of JBXN pickups in my Squier but haven't changed the pickups in the Tanglewater. The output from the bridge pickup in my Tanglewater is quite low and I've had to push the P pickup down and bring the J pickup way up to compensate.

Link to comment
Share on other sites

FWIW I really like the pickups in my Classic J. I do find the output a bit on the low side though, the J bridge PUP especially so.

After a few emails back and forth with Alun Entwistle - who makes the stock PUPs, albeit to Overwater spec - I went for his standard JBX bridge PUP, just to try to equalise the relative outputs really, rather than to change the tone, and I'm really pleased with it. A touch brighter sounding than the stock one, but still has most of the smoothness that I liked and the output's a bit stronger so it's much more usable blended with the P PUP.

And all for the princely sum of a tenner :) I've not tried the JBXN (I don't think it was available at the time I was looking) but reports are very good.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...