Jump to content
Why become a member? ×

SOLD
£1400


mrbassman_de
 Share

Recommended Posts

AER Basscube 2

Selling my wonderful AER Basscube 2 amp. These small and powerful cubes are designed to be used with double basses AND electric basses. I personally find them extraordinarily well for old Fender basses. The sound is deep, warm, full and even throughout the whole spectrum and supports the natural tone of even a good old electric bass in the best way.

This Basscube is version 2 with the 2 independent full-featured channels. Fully loaded with all features you would need to control your bass sound in any environment: 2 input channels, aux input, Notch filter, compressor (very subtle and nice), phantom power, etc etc.

Offered for street price of 2,520 GBP / 3.150 EUR (Thomann) and up !! These amps are a rare find on the 2nd hand market and for a good reason !

The exeptional small dimensions might lead you to underestimate this cube. You won't believe how full and loud these small amps are (that's true for all AER amps including the amazing mini combo AER Amp One).

Condition is excellent. Some dust on the vinyl, but nothing is damaged. Works 100%.

Comes in original Box with original cover. Shipping from Duesseldorf / Germany.

SOLD

Here are the specs from AER:

AER Basscube 2 Bass Amp (550w)
2 Channel Highend Bassamp For Acoustic Double Bass

The BassCube 2 has proven to do an excellent job to reproduce both double bass and electrical bass authentically. Well balanced analogue sound design covers the ranges gently and proportionately so that tone always stays clear, crisp and transparent yet powerful !

Its two channels are equally equipped and allow two different instruments set up in all comfort and be sure it works very well for electric bass too.
Whether ‘arco’ or ‘pizzicato’ – the BassCube 2 sounds like your bass: round and open – you can hear the stroke of your bow as true to life as the placing of your fingers on the motherboard.

• 550 watts, dynamic control
• Two-way coaxial neodymium speaker system, 12“ bass plus 1“ HF driver
• Twin-channel 2-way acoustic system
• Compressor and selectable input stage
• 20,00 kg (44.00 lbs)

Inputs
channels 1, 2 Combo socket XLR + 6.3 mm (1/4”) input jack socket as high impedance unbalanced jack input for instruments, line-level and mic-mode sources. (To be addressed by mode switch: piezo, line, 9 V, mic, 48V, E/P

Tone Contols
equalizer three band tone controls for both channels
colour ‘mid-cut-treble-boost’-filter
Compressor with ratio and threshold,
Notch filter with frequency, level and bandwidth switch.

Power
power amp 550 W / 8 ohms, dynamic control
analog signal subsonic filter, low distortion processing RMS limiter

Speaker Systems
Two-way coaxial neodymium speaker system, 12“ bass plus 1“ HF driver
crossover fc = 3,9 kHz, 12dB / oct.

Features
adjustable DI-master, DI-channel 1 and 2, aux in, aux out, monitor, tuner, line out, subbass headphones insert master, insert channel 1 and 2, footswitch (mute channels and switch solo/ensemble), ground lift

Accessories
softcover

Specs
cabinet 18 mm (0.70”) Birch plywood
finish waterbased acrylic, black spatter finish
dimensions 400 mm x 400 mm x 365 mm (15.70“ x 15.70“ x 14.00“), HxWxD
weight 20,00 kg (44.00 lbs)

Pics:
[url="http://s934.photobucket.com/user/mrbassman_de/library/Misc/Bass%20Equipment/AER%20Basscube%202"]http://s934.photobuc...%20Basscube%202[/url]

Edited by mrbassman_de
Link to comment
Share on other sites

  • 1 month later...
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...