col.decker Posted March 31, 2014 Share Posted March 31, 2014 Warning Newb question. While I was on the bog earlier I was pondering my rig set up. I play an active bass (Ibanez sb700) into a Zoom B3, thru a couple of pedals, and into the amp.The Zoom B3 has an active/passive switch on the input. So naturally I have the B3 set to Active. But what is the output of the B3 classed as, Active or Passive? Ie which input should I be using on my amp? To be honest I've been putting it in the Active input cos its an active bass, but it occurred to me today that maybe the B3 is doing the Active/Passive crossover & leveling bit, and that I should plug into the Passive amp input. what ya think? Quote Link to comment Share on other sites More sharing options...
Happy Jack Posted March 31, 2014 Share Posted March 31, 2014 I think that constipation is the thief of time. Quote Link to comment Share on other sites More sharing options...
HowieBass Posted March 31, 2014 Share Posted March 31, 2014 I'd do the same as you, run into the active input; I doubt the Zoom would drop the signal down to the level of a passive instrument and some people would use the B3 as an active pre-amp anyway. The B3's maximum output level: [line]+5dBm(Output load impedance 10kΩ or higher). Quote Link to comment Share on other sites More sharing options...
col.decker Posted March 31, 2014 Author Share Posted March 31, 2014 (edited) [quote name='Happy Jack' timestamp='1396272095' post='2411602'] I think that constipation is the thief of time. [/quote] No constipation here today, I was paying for a Sunday of real ale and roasted meats. The stuff was flying out of me. Edited March 31, 2014 by col.decker Quote Link to comment Share on other sites More sharing options...
discreet Posted March 31, 2014 Share Posted March 31, 2014 [quote name='col.decker' timestamp='1396271873' post='2411599'] While I was on the bog earlier I was pondering my rig set up. [/quote] Ah yes, while in the smallest room my thoughts often turn to the bottom end. Quote Link to comment Share on other sites More sharing options...
GregBass Posted March 31, 2014 Share Posted March 31, 2014 Try both inputs and choose the one with sound you like best. If the signal from your fx is to high for the passive input, it will clip and start to distort the signal. Quote Link to comment Share on other sites More sharing options...
Greggo Posted April 1, 2014 Share Posted April 1, 2014 [quote name='col.decker' timestamp='1396271873' post='2411599'] While I was on the bog earlier I was pondering my rig set up. [/quote] Haha! Got to be the funniest opening line I've read for a while! Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.