Jump to content
Why become a member? ×

Condensor mic - 2 questions.


paddy109
 Share

Recommended Posts

You'll need a large diaphragm mic. I don't have any particular model recommendations but the AKG stuff I have used at both ends of the budget line have all been really good.
For live use though you need to get one with a Cardiod polar pattern or you're gonna feedback lots.
May I ask why it needs to be a condenser?
I have used Sennheiser 421, EV RE20 and AKG D112 for miking bass instruments - all are large diaphragm dynamic mics (not condensers) though.
Have you considered a piezo pickup?

Link to comment
Share on other sites

As they say on the other side of the pond, a condensor mic is not a cheap date. It needs a good preamp with a notch filter to limit the terrible feedback that you'll get if you use your own back line and to get all the nuances that a mic will pick up a nice powered speaker on a pole will do it. Then it helps to have a piezo feeding in just to give a bit of bite. It can be done and I've had amazing results - but all that kit and all those wires. I'm with Jake, use a piezo and enjoy the gig.

Only exception is if there is a good front of house with a helpful engineer, but still monitor with the piezo.

Link to comment
Share on other sites

Hi
I've tended to use one of the cheap slot-in bridge piezos from eBay, but as I don't need huge volume (I play in Church), I've just ordered this clamp-on condensor to see if it gives a more natural tone:
[url="http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=140422452918&ssPageName=ADME:L:OC:GB:1123"]http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=140422452918&ssPageName=ADME:L:OC:GB:1123[/url]
It looks identical to this one from Studiospares (currently out-of-stock)
[url="http://www.studiospares.com/mics-instrument/studiospares-s150-miniature-instrument-mic/invt/449180/"]http://www.studiospares.com/mics-instrument/studiospares-s150-miniature-instrument-mic/invt/449180/[/url]
but even with postage, it's only just over half the price!
I'm not sure if the bass response will be that strong, but it's worth a try for the price.
Also need to work out where best to fix it, as foot of bridge may be too thick for the 13mm max clamp opening - might try fixing to the tailpiece, or further up the bridge, or under the centre of the bridge between the two feet - trial and error!

Link to comment
Share on other sites

[quote name='bassace' timestamp='1328629544' post='1530307']
It can be done and I've had amazing results - but all that kit and all those wires. I'm with Jake, use a piezo and enjoy the gig.

Only exception is if there is a good front of house with a helpful engineer, but still monitor with the piezo.
[/quote]

+1

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...