Replacement Pots for EMG

[tonyf]

Hi All,

I want to replace the 2 x VOL configuration on my EMG BTS EQ equipped Spector with a VOL and PAN. At the same time as I've got the back open, I want to replace the other pots too. Reason? I've had the preamp for years and it's been in and out of a few of my basses. The centre indents on the bass and treble tone controls now feel a little indistinct so would like to return them to "new feel".

Does anyone know the type of pots for the vol/pan/bass/treble I should be ordering (and places where I can get them)? Aside from 25k audio taper, I've not got a clue.

Cheers
T

[JimBobTTD]

EMG sell spare bits themselves - I'd go to my local guitar shop and ask them to sort you out.

[Dood]

If you're in any doubt, I recommend sending a mail to EMG support. I think the guy I usually end up chatting to, Rick is always very helpful and knows his stuff. - I have seen EMG harmesses and components come up on eBay - so hopefully armed with the necessary component information, you might be able to pick up a bargain.

[tonyf]

[quote name='dood' post='954660' date='Sep 13 2010, 01:01 PM']If you're in any doubt, I recommend sending a mail to EMG support. I think the guy I usually end up chatting to, Rick is always very helpful and knows his stuff. - I have seen EMG harmesses and components come up on eBay - so hopefully armed with the necessary component information, you might be able to pick up a bargain.[/quote]

Thanks for the advice Dan, just dropped them an email.

T

[Mcgiver69]

You need to buy a 50k balance pot, the wiring is on the web and very simple to do.

Edited September 19, 2010 by Mcgiver69