Sidlanir

@AndyTravis many thanks, btw this one will be a super lightweight bass!

Hi all , the first 4 String bass is still in progress, just a few minor adjustments done on the neck ...

Hi all , today is Mother’s Day in Luxembourg & it’s Sunday too... normally I didn’t work , but I can’t wait to finish this first 4 string bass ...

Inserts for Aguilar  P/J PU ,battery box , copper shielding, Straplocks installed ...

Hi all, my painter was busy, but today I got it finally back.!

Now I can finish my first 4 string bass , but what do you would do: without or with pick guard ??

Some news from my workshop: Neck set test , Hipshot bridge & Aguilar soapbar PU alignments done...

Back to work, EVO-FX5 body sanded down...

New

Hi, some news from my workbench, The EVO-FX 5 is sanded & the next days the first filler and paint coats will be applied...

Hi , stickers applied on my first 4 String Bass.This bass will be a burner with a few goodies.... stay tuned dear friends!

@Andyjr1515 YES I'm doing all the rough job on my CNC machine ; all the rest per hand ..

Hi , after the EVO-FX5 prototype, here is the first serial model in progress; still a lot of work to do, but  it will be a killer Bass!

@SpondonBassed many thanks 😉the machine heads shaft were replaced with shorter one (many thanks to Hipshot for these custom made shaft )

Hi, the EVO-FX5 prototype is almost finished; Audere Audio Classic preamp installed & this time the knobs are also installed... cleaned the bass & took off the plastic film from the scratch plate!

I’m very satisfied with the results & the first serial FX5 is on it’s way....

@Andyjr1515 Many thanks !! I'm the hologramm 😊 ... the bass was polished ,but I didn't  get time to clean the bass again ....

Hi, the EVO-FX5 prototype is almost finished; Audere Audio Classic preamp installed ; first rough setup & test drive done !

I’m very satisfied with the results & the first serial FX5 is on it’s way....

Hi, attached a few pictures of the work in progress on the final design of my EVO-FX5 bass

here is the backside almost finished...

@Andyjr1515  minimun 9 passes are needed ...

Hi , I've started my official EVO-FX5 today! the design has minor changes & it was funny to see my CNC machine doing the rough job.

Tomorrow I'll do the back side ....

Hi, back to the EVO-FX5 Prototype.... Bridge, PU & Scratch-Plate adjustment

Hi , today I paid a visit to my painter, to see the progress on my new EVO-FX4 .... he told me that people were crazy because they all want to get their eastern eggs painted.... anyhow, next week is another one .... stay tuned...

Ok ,  PU cavity enlarged .... 

Many thanks :😊

Hi all,

I'm back again with my Prototype EVO-FX5 .... I've changed the PU configuration J/MM ...therefor I've to enlarge the bridge PU cavity ...

Hi, below the details of my BLU Edition Bass :

Details: EvoluZione BLUE Edition 522 serial 03142019 Bass

Construction / Wood:

Neck: bolt on (with 6 screws & steel inserts)

Maple Neck with Pau Ferro fingerboard, only Lumilay side dots

22 frets

Body: One Piece Ash

Electronics:

Noll Preamp TCM 3 / B2012

2x 5 String  Häussel Custom Made Single Coils PU (+ dummy coil)

1 Gotoh Double Battery Box (18V)

Hardware:

Hipshot Chrome 5 String A Style Bass Bridge, String Through Body

Hipshot Chrome HB6 - 1/2'' Ultralite Tuner

ETS String Tree

Dunlop Straplok® Dual Design Strap Retainer

Finish:

BLUE Edition Gloss finish

Neck measurement:

Scale:      876.30 mm / 34 ½ "

Nut:         47.625 mm / 1 7/8 "

22. fret:   74 mm / 2.906”

Bridge:    19 mm (0.75") each string

Weight: 5.20 kg

Hi, below the details of my Red Edition Bass :

Details: EvoluZione RED Edition 522 serial 03142019 Bass

Construction / Wood:

Neck: bolt on (with 6 screws & steel inserts)

Maple Neck with Pau Ferro fingerboard, only Lumilay side dots

22 frets

Body: One Piece Poplar & Maple top

Electronics:

Aguilar OBP-3, Volume (push-pull active/passive)-Blend – Bass- Mid (push-pull freq sel) – Treble

2x Delano The Xtender 5 HE Pickups double twin coil in-line hum canceller (quad coil)

2 mini toggle switch: series / single coil / parallel

1 Gotoh Double Battery Box (18V)

Hardware:

Hipshot Chrome 5 String A Style Bass Bridge, String Through Body

Hipshot Chrome HB6 - 1/2'' Ultralite Tuner

ETS String Tree

Dunlop Straplok® Dual Design Strap Retainer

Finish:

RED Edition Gloss finish

Neck measurement:

Scale: 876.30 mm / 34 ½ "

Nut: 47.625 mm / 1 7/8 "

22. fret: 74 mm / 2.906”

Bridge: 19 mm (0.75") each string

Weight: 4.25 kg