rainbowreality

Hi there, I'm looking for spare parts for the electronics in my Tribute L2000. The tone pot is starting to go and I need to to replace it, maybe a switch too. Problem is the Tribute series use non standard pots and I'm struggling to find spares here in the UK. Anyone here have any ideas? Paul

[quote name='Kitsto' timestamp='1479759466' post='3179082'] I know nothing about the technology but as a Zoom B3 owner I know there is a problem with power supply. I think it's to do with poor earthing and so varies between venues and this may be a cause. Anyway, try using battery power. [/quote] I tend to use a usb power plug (like the sort you get with many mobile phones etc) and that seems less noisy than the wall wart supplied. Would that also get around the earth issue you mention too?

[quote name='ikay' timestamp='1459717337' post='3018987'] Jeez that spaghetti of wiring is shocking! [/quote] Tell me about it!

Cheers Neepheid!I had seen that schematic but wasn't sure if it applied to tributes so thanks for clarifying that. I was going to attempt the repair myself but seeing how messy it his inside I'm kinda hovering whether to take it to a engineer instead especially as the toggle switches aren't standard so I wouldn't want to screw it up!

And a couple of more

Hi Ikay, cherers for your reply. I've tried taking a couple of pictures of the wiring, It's pretty messy in there. Looking closely it looks like they've not done the best job of soldering in the factory!

Hello there, I've been looking for the wiring diagram for my Indonesian made tribute. Apparently the wiring differs from the USA made L2000's. I need one because one of the wires from the series/parallel switch has come away and I've no idea where it goes! I've looked everywhere with not much luck, can anyone kindly assist?

Hello there, I've been looking for the wiring diagram for my Indonesian made tribute. Apparently the wiring differs from the USA made L2000's. I need one because one of the wire from the series/parallel switch has come away and I've no idea where it goes! I've looked everywhere with not much luck, can anyone kindly assist?

[quote name='BigRedX' timestamp='1453025751' post='2955542'] Be aware that a lot of 4-core and screen cable isn't very robust, due the fact that manufacturers try and cram the extra cores into a standard 2core and screen cable thickness. This leads to the the signal cables being very skinny and easily damaged unless you are always extra careful about coiling the cable up when putting it away. [/quote] I wonder if using two cables, one single shielded and one two core shielded might be a better option?

Fair point about the 4 strand, I'm being a ocd about it I think. Thanks for the info on the various options. I never knew you could get such a thing as those earth sleeves!

Thanks for the replies! What I mean is 3 core shielded (sorry). I was thinking of using 4 core shielded and not use one of the cores, just seems wasteful though! I'm starting to think 3 core doesn't exist! Another option I was considering was using 4 pieces of 22awg cable (one strand cable being shield) and twist or even plait them together as I've read somewhere this effectively shields them?

Cheers man

I can't find it anywhere (3 strand plus earth) I need some to rewire my bass so if anyone knows where to get any I'd be very grateful!

Hello everyone, I'm about to change the pots in my Squier P bass special. I usually fit a couple of cts full size pots for the volume and a mini alpha pot as I can't fit anything bigger in. I've looked for mini cts pots in vain but no luck, does anyone know a decent alternative? Or am I being a fuss pot and should just use alpha pots?

Just bought a Pitchblack off Marshall. Good guy to deal with and would happily buy from him again

Cheers chaps, plenty of great advice to think over here

Hi there everyone, I'm looking to buy a pair of headphones for monitoring music production, monitoring recording and the like. My budget isn't massive so something fairly cheap and cheerful but but will give a clean unbiased sound reproduction if possible. Any advice would be greatly appreciated!