Jump to content
Why become a member? ×

Rubbersoul

Member
  • Posts

    352
  • Joined

  • Last visited

Posts posted by Rubbersoul

  1. Thanks for the advice. I have been looking at the used market but here in Northern Ireland there isn’t a great deal about. Loads of 410, very few 210. Probably safer to stick with the higher power rated cabs, I will keep looking!

  2. Hi folks, I hope this isn't an entirely stupid question but here goes. 

     

    I currently run an Ashdown MAG 300 head through a matching 410 cab. The head  is rated 300W RMS, 500W Peak with a minimum load of 4 Ohms. The Cab is rated 450W at 8 Ohms. This works well. My problem is that the cab is the weight of a small moon and, being rather disabled, it's not the easiest thing to lug around. I am therefore considering a cheap and light 210 cab. Now here is the dumb question: Can I add a cab rated for less wattage, say 150W, without too great a risk of blowing it up? Should I go for 8 Ohms or 4? Is there some sort of power reducer / attenuator that would prevent an overload? Is this just a really bad idea?

     

    Thanks for any advice received, I am useless at this sort of technical stuff.

     

    Cheers, Steve

  3. Plugged into one of these tonight at our practice studio. I must say, it was outstanding! Clear, punchy, full, frankly everything you could want in a combo. Thoroughly recommend trying one if you get a chance.

×
×
  • Create New...