Acebassmusic

[quote name='Reissueplayer' timestamp='1337634263' post='1663330']
If you're willing to ship to Stockholm, Sweden, and accept Paypal, I could take this off your hands. Let me know

Cheers,

Ola
[/quote]

Certainly is an option If you let me have your address (in PM) I will get a quote for shipping. We can do Paypal as as long as its as a gift. I have good feedback on here and on Ebay as Acebassmusic. Do you have a feedback link on here?

Bump

Bump

Bump

Bump

We usually start with something like "Long Train Running" - immediately recognisable and gets people feet tapping straight away. We do 3 or 4 songs one straight after the other, minimal gap, just to get the momentum going.

[quote name='Matte_black' timestamp='1337542207' post='1661712']
Can it drive a power amp?
[/quote]

Yes. I used to use it with a QSC PLX-1604. You can also use it as a channel strip pre-amp for recording with.

More stuff to clear out and make space

Here are 2 Elecrovoice SX200 PA cab which are great for vocals etc. They are pretty clean with some minor knocks. They can either be used on their own or with subs. They are each 300w RMS rated at 8 ohms.

I was using them as monitors for the band so they havent been pushed very hard. They come complete with padded covers by Falcon and also the plastic stands that allow you to use the cabs at the correct angle as monitors.

I'm looking for £200 for the lot + shipping

.

Sunny Sunday Bump

I've decided to have a bit of a clear out and have several items I want to get rid of so I can buy more stuff to fill the space that I've just made.....you know how it goes

Anyway.....here is my back up sound processor in very good condition. Its a DBX DDP Digital Dynamic Processor and has lots of functions - compressor, gate, parametric, expander, EQ, limiter etc. I'm looking for £110 + shipping which I think will be in the region of £15 for most of mainland UK.

The pics show it currently rack mounted with an Ampeg SVP-PRO pre-amp which is for sale in another thread.

I've decided to have a bit of a clear out and have several items I want to get rid of so I can buy more stuff to fill the space that I've just made.....you know how it goes

Anyway.....here is my back up pre-amp Ampeg SVP-PRO in very good condition. I'm looking for £250 + shipping which I think will be in the region of £15 for most of mainland UK.

The pics show it currently rack mounted with a DBX DDP Digital Dynamics Processor (compressor etc) which is for sale in another thread.

Hi,

Whats the nut width and string spacing at the bridge? Does it come with a hard case?

Thanks

Buy it now is £1,400+.....and someone has been a bit "enthusiastic" with the sandpaper!!!!

[url="http://www.ebay.co.uk/itm/VINTAGE-FENDER-1966-JAZZ-BASS-GUITAR-ORIGINAL-NECK-ROSEWOOD-USA-/370607632383?_trksid=p4340.m185&_trkparms=algo%3DDLSL%252BSIC.NPJS%26its%3DI%26itu%3DUCI%252BUA%26otn%3D10%26pmod%3D160788603022%252B160788603022%26po%3D%26ps%3D63%26clkid%3D8065049195018183460"]http://www.ebay.co.u...049195018183460[/url]

[quote name='Monckyman' timestamp='1334135306' post='1611246']
Slug tape!
Genius!
[/quote]

I'd love to take the credit on this.........but I got the idea off another post......on here I think it was

Yip, I had the same problem (mine was second hand). Lots of earth hiss and fizz until I shielded everything - battery compartment electrics routing and pick-up recesses. I joined all of them together by soldering short lengths of wire from one to the other and then finally to earth. Used slug tape from B&Q Waaay better now.

I think Fender should be highly embarrased about sending out basses that cost in the region of £1k+ with this type of issue. There are a lot of budget basses that dont have this problem. Right.....just got to go and find a ladder so I can climb down off my soapbox....

[quote name='rubis' timestamp='1333566446' post='1603734']
Is that a brass plate at the heel of the fretless neck?
I think Wilkes used to do one like that for slapping
Is it any good?
[/quote]

Yip its a brass plate and is for slappin' It seemed to give a good attack like frets would and also protected the end of the fretboard.

[b][size=4][font=arial,helvetica,sans-serif]Babicz Full Contact Hardware 5 String Bass Bridge Gold - I put one on my Fender USA 5 and it makes it so easy to intonate and adjust. If you check out Bass Direct they sell these for about £170-ish. This guys got one for £75 - new. [/font][/size][/b]

[url="http://www.ebay.co.uk/itm/Babicz-Full-Contact-Hardware-5-String-Bass-Bridge-Gold-/270940534053?pt=UK_Musical_Instruments_Guitars_CV&hash=item3f15507525"][b][size=4][font=arial,helvetica,sans-serif]http://www.ebay.co.uk/itm/Babicz-Full-Contact-Hardware-5-String-Bass-Bridge-Gold-/270940534053?pt=UK_Musical_Instruments_Guitars_CV&hash=item3f15507525[/font][/size][/b][/url]

[quote name='neepheid' timestamp='1331725218' post='1577680']
Do you mean this one?

[url="http://www.ebay.co.uk/itm/130663266551"]http://www.ebay.co.uk/itm/130663266551[/url]
[/quote]

Oops yes thats the one. Thanks for posting the full link.

Just been sent a link to my old 1979 Musicman Sabre bass that I put in px for a Jaydee Calibas 5 string in 1998. That was through the Embassy in Mansfield if anyone remembers it? I'd travelled down to buy a matching pair of 5 string Wals (John Vannamans own if I remember, with elm facings). I think he was asking £1500.....yes you read it right 2 Wals for what you now pay for the jack socket and an old set of pickups!!! Been gutted ever since....but I got the Calibas and was a very happy chappy.

Anyway, back to the plot......I'd owned the bass for about 11 years and when I'd bought it it had 2 Gordon custom fretted and fretless necks which i swapped occasionaly. From the looks of the photos the bass is in exactly the same condition I sold it 14 years ago!!

Ah it brings back memories of some good times......enjoy

[url="http://Musicman%20Sabre%20bass.%204%20string.%20Pre%20Ernie%20Ball%201979,%20Gordon%20Neck"]http://Musicman Sabre bass. 4 string. Pre Ernie Ball 1979, Gordon Neck[/url]

Bumpski

Bumpered

Nice bass....shame the only thing I have to trade is bits of paper with some numbers on and a famous ladies picture.....I wonder how many you would need?

[quote name='razze06' timestamp='1328617937' post='1529994']
I'm trying to push for a stripped down reggae version of it, should spice it up a little
[/quote]

We do it...standard chorus with a reggae style verse and rap section People dont recognise it until the vocals come in and then its "Aaah!" Goes down well with the punters.

Thanks for the offer but I'll pass. I'm not in a rush to sell.

Heres one for comparison:
[url="http://www.ebay.co.uk/itm/JOE-MEEK-VC6CS-MEEKBOX-MIC-PRE-AMP-NICE-/350529278138?pt=LH_DefaultDomain_0&hash=item519d2c50ba"]http://www.ebay.co.uk/itm/JOE-MEEK-VC6CS-MEEKBOX-MIC-PRE-AMP-NICE-/350529278138?pt=LH_DefaultDomain_0&hash=item519d2c50ba[/url]