Jump to content
Why become a member? ×

disssa

Member
  • Posts

    378
  • Joined

  • Last visited

Everything posted by disssa

  1. disssa

    DIY Effects

    Dunwich Volt Thrower clone
  2. disssa

    DIY Effects

    Peavey Standard 260 Series Preamp: 2-Channel Preamp: Channel 1 "Effects" and Channel 2 "Normal". A rotary switch can be used to choose channel 1 or 2, or channel 1 and 2 parallel or in series
  3. disssa

    DIY Effects

    The EQP is a zerofive audio LowRider clone.
  4. disssa

    DIY Effects

    From big to small:
  5. disssa

    DIY Effects

    I traced a JLO HyperDrive and used a 125B enclosure:
  6. disssa

    DIY Effects

    My version of the Traynor TS-50B preamplifier:
  7. disssa

    DIY Effects

    Sunn Beta Bass Preamp
  8. disssa

    DIY Effects

    Unfortunately not at the moment. I would like to change the PCB a little because there are one...two errors. Maybe then...
  9. disssa

    DIY Effects

    Peavey Standard MKIII Preamp:
  10. disssa

    DIY Effects

    My version of the Matchless DC-30 preamp (EF86 channel only):
  11. disssa

    DIY Effects

    Not an 1:1 clone (this will come next) but really close to a Furman PQ3:
  12. disssa

    DIY Effects

    Way Huge Angry Troll Clone:
  13. disssa

    DIY Effects

    I used the original factory schematics 1:1, also for the switching. I compared the copy with the original. They sound the same to my ears.
  14. disssa

    DIY Effects

    Some of my Peavey (Preamp) Clones:
  15. disssa

    DIY Effects

    Acoustic 360 preamp: First I tried the viva-analog Version, but I dont like it. The assembly instructions are not easy to understand and also contain errors. The potentiometer layout is terrible and looks amateurish. So I used the Factory schematics and designed my own PCB layout. I kept the blend function.
  16. disssa

    DIY Effects

    The heatsink is bolted to the voltage regulator of the tube heater. According to the data sheet, no heatsink needs to be used. But I do. The voltage regulator gets very hot. I created the layout for the pcb. I used the factory schematics.
  17. disssa

    DIY Effects

    Fender Bassman 100 Preamp (bass channel):
  18. disssa

    DIY Effects

    What is the fault? Capacitor and diodes polarity correct? ICs plugged in correctly?
  19. disssa

    DIY Effects

    I created two different versions of the pcb. Version 1 is only a single channel-version, version 2 is a dual channel-version. How important is the limiter? Should both channels be switchable?
  20. disssa

    DIY Effects

    I made a PCB, but haven't set it up and tested it yet...
  21. disssa

    DIY Effects

    Mesa Boogie M6 Preamp:
  22. disssa

    DIY Effects

    A mix between Vong by schalltechnik 04 and Broughton Hi/Lo PassFilter:
×
×
  • Create New...