Mr. Foxen Posted October 21, 2009 Share Posted October 21, 2009 [quote name='waynepunkdude' post='632109' date='Oct 21 2009, 09:28 AM']I'm looking at a 2X15 that is 500W @ 4OHMS my 4X10 is 600W @ 8OHMS would the uneven load cause a problem or will it be fine as it is off of 2 separate power amps?[/quote] Find out what speakers are in it, post it up, with some cab measurements, and someone can give a rough idea of how much low end juice it can take. Quote Link to comment Share on other sites More sharing options...
Bill Fitzmaurice Posted October 21, 2009 Share Posted October 21, 2009 [quote name='Mr. Foxen' post='632407' date='Oct 21 2009, 09:37 AM']Find out what speakers are in it[/quote] Good luck. Most manufacturers are less forthcoming about the drivers they use than Joan Collins is with her birth date. Quote Link to comment Share on other sites More sharing options...
Mr. Foxen Posted October 21, 2009 Share Posted October 21, 2009 [quote name='Bill Fitzmaurice' post='632469' date='Oct 21 2009, 03:42 PM']Good luck. Most manufacturers are less forthcoming about the drivers they use than Joan Collins is with her birth date. [/quote] People do have a habit of writing about it on the internet though. Give us the cab details and gogo gadget google. Quote Link to comment Share on other sites More sharing options...
Bill Fitzmaurice Posted October 21, 2009 Share Posted October 21, 2009 [quote name='Mr. Foxen' post='632484' date='Oct 21 2009, 10:54 AM']People do have a habit of writing about it on the internet though.[/quote]That they do, but consider that the specs on probably the most envied driver, the original CTS Ampeg SVT, are not to be found anywhere. For that matter those on the current Eminence SVT driver are also unavailable. I've got them, but like all those in the industry I won't reveal them, as it's privileged information. As for measuring them yourself, unless you've got a Klippel analyzer handy, or tear the voice coil out to measure the coil length and plate thickness, that all important xmax remains an unknown. It's easier to just schlep your rig into a store and try cabs. Quote Link to comment Share on other sites More sharing options...
waynepunkdude Posted October 21, 2009 Author Share Posted October 21, 2009 It's this one. [url="http://www.samsontech.com/products/productpage.cfm?prodID=1691"]http://www.samsontech.com/products/product...cfm?prodID=1691[/url] Quote Link to comment Share on other sites More sharing options...
Mr. Foxen Posted October 21, 2009 Share Posted October 21, 2009 [quote name='waynepunkdude' post='632946' date='Oct 21 2009, 10:34 PM']It's this one. [url="http://www.samsontech.com/products/productpage.cfm?prodID=1691"]http://www.samsontech.com/products/product...cfm?prodID=1691[/url][/quote] I ran the aluminium coned one for a gig, did an admirable job of kicking out the required bottom end. Quote Link to comment Share on other sites More sharing options...
Bill Fitzmaurice Posted October 21, 2009 Share Posted October 21, 2009 [quote name='waynepunkdude' post='632946' date='Oct 21 2009, 05:34 PM']It's this one. [url="http://www.samsontech.com/products/productpage.cfm?prodID=1691"]http://www.samsontech.com/products/product...cfm?prodID=1691[/url][/quote]There's not one useful bit of information there that might indicate how it will actually work, but that's not the exception, it's the rule. Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.