Mic'ing a bass cab live

[Steve Browning]

What do BC'ers use if/when mic'ing a bass cab live? I'm not after anything overly expensive. It's for occasional use (alongside the wonderful valve DI in the TT800).

 

I've watched a good few videos and am drawn to the Behringer C112 - alongside the DI signal. Any other ideas/thoughts?

[BigRedX]

Really whatever you want, but you absolutely should not be using a kick drum mic as the frequency response is wrong and you'll be competing with the kick drum sound.

 

The reality is that unless you are playing huge stages with your own sound engineer, any mic on your bass rig will be mostly for show and the main proportion of your FoH sound will come from the DI.

 

Remember also that a single close mic on one driver in your rig is not picking up the same sound you hear from the whole rig when stood a few feet away from it. Save the mics for the recording studio and if you like the sound you are getting FoH from your DI signal path stick with that.

[Dan Dare]

Good advice above. A quality DI will do the job in small to medium sized venues. In a smaller venue, some sound from the backline will reach the audience anyway. Most decent amps have an XLR/DI out, which you can set to use the eq setting on the amp, or flat.

 

Quite often, the sound that works on stage doesn't translate that well to the room, so you may want to eq the bass differently in the PA.