Joeyfivebags Posted August 4 Posted August 4 I bought a new control plate for my Fender Japan JB62 PJ as i'm doing some electronic upgrades and needed wider pot holes. However despite the overall dimensions appear correct the new plate seems to have a different 'curve' on the volume pot end and therefore doesn't fit the pickguard. Any ideas as to what plate i'm likely to need as i'd rather not drill out the holes on the original? Quote
snorkie635 Posted August 4 Posted August 4 5 minutes ago, Joeyfivebags said: I bought a new control plate for my Fender Japan JB62 PJ as i'm doing some electronic upgrades and needed wider pot holes. However despite the overall dimensions appear correct the new plate seems to have a different 'curve' on the volume pot end and therefore doesn't fit the pickguard. Any ideas as to what plate i'm likely to need as i'd rather not drill out the holes on the original? Calling @Hellzero? Quote
snorkie635 Posted August 4 Posted August 4 6 minutes ago, Joeyfivebags said: I bought a new control plate for my Fender Japan JB62 PJ as i'm doing some electronic upgrades and needed wider pot holes. However despite the overall dimensions appear correct the new plate seems to have a different 'curve' on the volume pot end and therefore doesn't fit the pickguard. Any ideas as to what plate i'm likely to need as i'd rather not drill out the holes on the original? Calling the cavalry Joey. Help should reach you soon, one way or another. Best of luck. 1 Quote
gjones Posted August 4 Posted August 4 I found that removing the pickguard, then fitting the control plate, and then re-fitting the pickguard usually works. It took me a while to figure this method out though, as in the past I've ended up sanding the pickguard to get it, and the control panel, to fit snugly. 1 1 Quote
Joeyfivebags Posted August 4 Author Posted August 4 3 minutes ago, gjones said: I found that removing the pickguard, then fitting the control plate, and then re-fitting the pickguard usually works. It took me a while to figure this method out though, as in the past I've ended up sanding the pickguard to get it, and the control panel, to fit snugly. Cheers for the advice and ill keep it in mind, unfortunately i don't think it will help in this case as a side by side shows that the widest part is a few mm further forward on the new one resulting in a shallower angle on the 'curve' meaning there will always be a gap between guard and plate Quote
JJMotown Posted August 4 Posted August 4 Japanese dimensions and fit are different to standard. The curve you're talking about you'll have to judge by eye, some are rounded, others more angular. 1 Quote
Joeyfivebags Posted August 4 Author Posted August 4 Just double checked the dimenions on the product page of the gotoh plate i bought and didn't notice that they specify the screw spacing, appears i've brought the wrong plate. Cheers for the help all 1 Quote
Hellzero Posted August 5 Posted August 5 Hélas, there is no right out of the box control plate for these Japanese Jazz Basses except being sure it's coming from one of these basses. Before buying ask for the dimensions if they are not stated or put a very specific request here (with the dimensions) : https://www.basschat.co.uk/forum/22-items-wanted/ 1 Quote
Joeyfivebags Posted August 6 Author Posted August 6 For future reference if anyone's interested, allparts done one that fits. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.