solo4652 Posted May 7, 2009 Share Posted May 7, 2009 I'm fitting a new brass nut to my P-bass. I've removed the old one. What's the best way to secure the new one? Superglue? Epoxy resin (too brittle?)?. All suggestions gratefully received. Thanks, Steve Quote Link to comment Share on other sites More sharing options...
geoffbyrne Posted May 7, 2009 Share Posted May 7, 2009 I turned it upside down, put it in a vice & made a few deep scores in the base, then I used Superglue. Quote Link to comment Share on other sites More sharing options...
Paul_C Posted May 7, 2009 Share Posted May 7, 2009 superglue should be fine on a P bass, it's only when you have to deal with stresses on it that you need to do more, this was glued and has screws to keep it from moving : Quote Link to comment Share on other sites More sharing options...
solo4652 Posted May 8, 2009 Author Share Posted May 8, 2009 Thanks. Scores on the underside, and Superglue it is then. Quote Link to comment Share on other sites More sharing options...
solo4652 Posted May 8, 2009 Author Share Posted May 8, 2009 All sorted now. Just need to work out how to get superglue off the kitchen worktop... Quote Link to comment Share on other sites More sharing options...
BOD2 Posted May 8, 2009 Share Posted May 8, 2009 [quote name='solo4652' post='482928' date='May 8 2009, 01:53 PM']All sorted now. Just need to work out how to get superglue off the kitchen worktop...[/quote] Could be worse.... you might have had to work out how to get your fingers off the kitchen worktop ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.