stufunkybass Posted August 12, 2022 Share Posted August 12, 2022 Hi All, I know about ohms and delivering full power from amp heads etc. But have would like some advice or thoughts on the below. I have a 500 watt head and a 350 watt head plus a single 12" cab. The heads are different makes. My thinking is to add an extra cab to the 350 head or use the 500 watt head with the single cab. I play in a 4 piece soul/funk band. Welcome thoughts. Stu Quote Link to comment Share on other sites More sharing options...
Bill Fitzmaurice Posted August 13, 2022 Share Posted August 13, 2022 My advice is don't double post. 🙄 2 Quote Link to comment Share on other sites More sharing options...
stufunkybass Posted August 14, 2022 Author Share Posted August 14, 2022 Oh that's embarrassing 😆 1 Quote Link to comment Share on other sites More sharing options...
lownote Posted August 14, 2022 Share Posted August 14, 2022 I have recently been through similar questions. I am open to demolishment by grown ups. But IMHE ( experience), more speakerage is hugely more important than more watts. The 500w head with one 8 ohm cab will be around 250w. The 350w with two cabs will be 350w. Plus you get double the speakerage, which means far more oomphs. I thank you. That will be 10 baht. 3 Quote Link to comment Share on other sites More sharing options...
Bill Fitzmaurice Posted August 14, 2022 Share Posted August 14, 2022 We've all been through this identical question. Quote Link to comment Share on other sites More sharing options...
Downunderwonder Posted August 15, 2022 Share Posted August 15, 2022 When I added a 2nd cab to my 250w Trace the master never went above 2. Before that I sometimes had to max it out at 4. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.