AngelDeVille Posted November 19, 2019 Posted November 19, 2019 (edited) When I was assembling my fretless PBass, I ended up with a spare bridge. Ā I canāt just have a spare bridge laying about, so I gathered a few other parts. Ā My neck choices are a one piece maple tele, orĀ a rosewood Pbass, I think a TeleBird might even confuse me, so Iām leaning toward the rosewood. Ā Either neck works well on my fretted Pbass. EMG JV pickups, and a cheesy Chinese gold neck plate... I had to wait a while for this body, but I should have it within the week. Ā Iām going for a lighter blue than LPB, not certain on the shade... For theĀ next build, Iām starting with only a Pbass pickup and wiring harness.... Iām thinking double Pbass pickups and a non reverse body and a full rosewood neck... Edited November 19, 2019 by AngelDeVille 4 Quote
SpondonBassed Posted November 19, 2019 Posted November 19, 2019 12 hours ago, AngelDeVille said: I canāt just have a spare bridge laying about, so I gathered a few other parts. That's the spirit! Looking forward to the development of this project and your next. 2 Quote
AngelDeVille Posted November 19, 2019 Author Posted November 19, 2019 I forgot I need strings!Ā Ā I really like the EB cobalt flats, and the D'dario Chrome flats, but I may go with Roto flats (66?) all of which I can get at my local shop. Ā But I'm really tempted to mail order another set of Pyramid Golds....Ā I just love those.... 2 Quote
AngelDeVille Posted November 23, 2019 Author Posted November 23, 2019 Body is here but I won't get a chance to do much today. Ā I will have to rewire the EMG system, the wires between the pots and back are too short.Ā Ā 3 Quote
AngelDeVille Posted November 26, 2019 Author Posted November 26, 2019 Good news is this is a Holiday week in the US, and starting tomorrow afternoon, I should have everything in motion. Maybe a Cotton Candy Blue acrylic with a shellac topcoat.... Ā I just need foam and screws for the pickups, everything but that and the strings are on hand.Ā I think I have pickup springs in my stash of spares, maybe I'll get lucky and find screws too. Ā I should be playing to thunderous applause by Sunday... 3 Quote
AngelDeVille Posted November 27, 2019 Author Posted November 27, 2019 I couldnāt wait until tomorrow, initial stain before I tackle the wiring.... Ā 3 Quote
AngelDeVille Posted November 28, 2019 Author Posted November 28, 2019 (edited) I still need the flat wound strings, a neck shim,Ā pickup screws, flush mount straplocks and to make a control cover. I think she needs a pickguard too. Ā Edited November 28, 2019 by AngelDeVille 1 Quote
SpondonBassed Posted November 28, 2019 Posted November 28, 2019 On 23/11/2019 at 19:59, AngelDeVille said: I agree re: the pickguard.Ā My eye keeps going to the lower right hand corner of the unfinished body as seen in the image above.Ā It's different to the bass on the left. 1 Quote
AngelDeVille Posted November 28, 2019 Author Posted November 28, 2019 42 minutes ago, SpondonBassed said: I agree re: the pickguard.Ā My eye keeps going to the lower right hand corner of the unfinished body as seen in the image above.Ā It's different to the bass on the left. Iām not certain but Iām thinking aĀ black scratch plateĀ will look good. Ā If I was fully committed to using this neck I would match the headstock too. The neck is from my MIM Prescision, and while its not super valuable I would like to be able to restore it. 1 Quote
AngelDeVille Posted November 28, 2019 Author Posted November 28, 2019 The only thing keeping me from plugging her in are the screws for the pickups! Ā I donāt think any stores are open today! Iām deciding on pickguard and control plate material now. neck plate and strap lock... Ā Quote
AngelDeVille Posted November 29, 2019 Author Posted November 29, 2019 Stole the pickup screws from my Geddy Lee. Ā Scratch plate and control cover done. Ā Second hand EMGās.....Ā I have no neck pickup volume and tone control but the bridge pickup sounds awesome, Iāll chase down the problem tomorrow... Ā Ā 6 Quote
SpondonBassed Posted November 29, 2019 Posted November 29, 2019 You were right about the pickguard.Ā That works well. 1 Quote
AngelDeVille Posted November 29, 2019 Author Posted November 29, 2019 1 hour ago, SpondonBassed said: You were right about the pickguard.Ā That works well. It's a very thin .02" kydex, I use it for fret slot filler on fretless conversions. I will probably change it once I find my thicker stash, or leave it, it's just for looks anyway. Quote
AngelDeVille Posted December 1, 2019 Author Posted December 1, 2019 On 19/11/2019 at 07:57, SpondonBassed said: That's the spirit! Looking forward to the development of this project and your next. I'm sorting the electronics for that one right now. I'm searching for an explorer body, double Pbass pickups and will probably get a full rosewood tele neck. Not sure if she will be fretless. https://www.basschat.co.uk/topic/382718-2-pickup-control-suggestions/ Ā 1 Quote
AngelDeVille Posted December 2, 2019 Author Posted December 2, 2019 (edited) SO...... Ā My bridge pickup was the only thing working.... NO neck pickup, No tone.... I had run through the wiring from the back panel and saw no issues. Ā I took the Neck pickup out last night, and flipped the plug to the CORRECT orientation....š¤©Ā now I have a neck pickup.... kinda feel stupid since it has an arrow that shows how it fits....š Ā Tone issue... now that the neck is sorted, I think there is an almost imperceptable difference between 1-11, I'm thinking it has the wrong capacitor. (got the set used) Should be a 0.1mf vs a .022-.047. It will take longer to look up the current value than it will to switch to the correct one.Ā I'm pretty sure i have some in the spares drawer. Ā This Bass is beyond awesome, I think I'll be selling my NEW Geddy Lee to offset the cost and to finance the next build. Ā I have decided I am not a Jazz Bass guy, and I don't feel bad about it.Ā Offset bodiesĀ don't feel right, but goofy Gibson shapes do... go figure... Ā I did add a thumbrest as well, even with pilot holes I broke 3 screws installing it. Cheap screws or hard wood? Ā Ā Ā Ā Edited December 2, 2019 by AngelDeVille 1 Quote
AngelDeVille Posted December 3, 2019 Author Posted December 3, 2019 (edited) She plays incredibly well, Iām for sure selling my Geddy Lee, maybe even my MIM Pbass... I have to hunt down my stash of capacitors for the tone fix, and Iām seriously considering replacing one of the volume pots with a blend knob. I did find my thicker Kydex for the pickguard, but I donāt think I need it. Ā Ā The next project is starting with 2 sets of Pbass pickups.... Ā Ā Ā Edited December 3, 2019 by AngelDeVille 3 Quote
AngelDeVille Posted December 5, 2019 Author Posted December 5, 2019 this weeks changes... Ā Both necks work equally well except for the gotoh āvintage reverse tunersāĀ on the one piece maple tele neck. Iāll get used to them eventually.or trade them for a gold set. I switched the bridge to a gold gotoh as well as the tele neck. I thought she deserved a new strap. I guess sheās a TeleBird now. Ā 2 Quote
AngelDeVille Posted December 6, 2019 Author Posted December 6, 2019 I just had to do it.... Ā I ordered a set of gold tuners.... Ā I still need gold pickup screws, and I already have a goldĀ jack plate on the way. 2 Quote
Andyjr1515 Posted December 15, 2019 Posted December 15, 2019 On 03/12/2019 at 01:39, AngelDeVille said: She plays incredibly well, Iām for sure selling my Geddy Lee, maybe even my MIM Pbass... I have to hunt down my stash of capacitors for the tone fix, and Iām seriously considering replacing one of the volume pots with a blend knob. I did find my thicker Kydex for the pickguard, but I donāt think I need it. Ā Ā The next project is starting with 2 sets of Pbass pickups.... Ā Ā Ā Looks great.Ā That pickguard really does set the colour off well 1 Quote
Andyjr1515 Posted December 15, 2019 Posted December 15, 2019 On 05/12/2019 at 00:29, AngelDeVille said: this weeks changes... Ā Both necks work equally well except for the gotoh āvintage reverse tunersāĀ on the one piece maple tele neck. Iāll get used to them eventually.or trade them for a gold set. I switched the bridge to a gold gotoh as well as the tele neck. I thought she deserved a new strap. I guess sheās a TeleBird now. Ā And yes, the maple goes really well.Ā While in general terms I'm not a great fan of tele headstocks, that addsĀ to the quirky vibe of the bass. 1 Quote
AngelDeVille Posted December 30, 2019 Author Posted December 30, 2019 (edited) I still haven't heard back from a guy that can make an explorer body, if it takes too long I'll just get a non-reverse, and be done with it.Ā I'll have reversed pickups as well. Ā So besides the pickups, I also found a chrome hipshot bridge, so the next one is going all chrome hardware.Ā I can't find the tiger neckplate in silver and I really like it, so it may get a gold tiger neckplate.Ā Maybe white pickguard and pickup covers? I think I'll order a warmoth neck, reverse tele headstock, 21 frets, purpleheart neck and fretboard. I'll semi match the color of the purpleheart for the body. I'm seriously considering a rosewood/rosewood reverse tele neck for the blue one. Ā The baked maple reverse on my fretless pbass Ā Ā Ā Edited December 30, 2019 by AngelDeVille 1 Quote
AngelDeVille Posted January 2, 2020 Author Posted January 2, 2020 (edited) I found this plate for a bit more than the tiger, the description says itās a dragon, but I think it looks like an angry Chihuahua. Or a flaming rat.. its perfect. Ā Ā Edited January 2, 2020 by AngelDeVille 3 2 Quote
AngelDeVille Posted January 5, 2020 Author Posted January 5, 2020 (edited) I got theĀ chrome Hipshot bridge for a decent price, so other than the neck plate and the string tree,Ā most everything else will be chrome. Ā the non-reverse body has been purchased. reverse double p pickups Fiesta Red, with a white pickguard is the plan. Ā Iām enjoying playing fretless quite a bit, so Iām considering a purpleheart fretless neck. Ā Ā Ā Edited January 5, 2020 by AngelDeVille 2 Quote
AngelDeVille Posted February 7, 2020 Author Posted February 7, 2020 Just waiting on the purpleheart neck... Ā 4 Quote
AngelDeVille Posted February 21, 2020 Author Posted February 21, 2020 (edited) 51 Slab side body should ship any day now... still waiting on two necks, and need to order at least one more, maybe two. Ā Next body confirmed, but it wonāt ship until the āVā body is done in a couple weeks.... Edited February 21, 2020 by AngelDeVille 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.