DG M900 AO | Mk2

[krispn]

On 25/03/2021 at 20:17, Al Krow said:

It's ok gents, you can stop fretting about the power amp capability on the DG M900. It doesn't cause me any concerns at all that I have plenty of headroom when using either my 8 ohm BF BB2 or 8 ohm fEARless F112. (And heaven forbid, I might even take them both out together at some point in the future...) 

I’m still none the wiser if BF offer both 4 and 8 ohm alternatives on all their cabs. Some manufacturers do. It’s not an unreasonable question.

I just took it for granted your 112’s were 4ohm or at least one of them was as you’ve talked a lot about your ‘900w at 4ohm’ - it’s no biggie just could be misleading for folk who were reading along. Actually it’s one of the reasons I was unsure if BF offered 4ohm versions of their 112 cabs as your statement implied (to me at least) you were getting 900w from the BB2/AO900 pairing. Most folk would discuss their gear in real terms - output etc. An example one of my amps is capable of 1200w but I don’t run it at 2ohm - I generally talk about it as an 800w at 4ohm head as that’s how I use it day to day. 

But you’re never taking two cabs to a gig 😀

Edited April 12, 2021 by krispn

[Al Krow]

19 minutes ago, krispn said:

I’m still none the wiser if BF offer both 4 and 8 ohm alternatives on all their cabs. Some manufacturers do. It’s not an unreasonable question.

But you’re never taking two cabs to a gig 😀

You checked BFs website yet? Full range and details spelt out in glorious detail if you're curious about all their cabs. Mostly 8 ohms only. Surprised your mate wasn't able to enlighten you on this... he's been a BF fan a while longer than me!

[krispn]

I did have a look but wasn’t sure if they did 4 ohms as special orders or if the older generations had the option of 4 or 8ohm.