Send amp signal to IEM post-EQ and PA Pre-EQ & keep band mix too!

[largo]

I'm going to try going IEM-only but I'm looking for an easy way to change my EQ & volume without mucking about with an iPhone app. I have one thought but wondered if there's a better/easier way to do it.

So, current rig is passive 5-string > Mesa D800 > 2 x Barefaced One10 with pre-EQ DI to a Soundcraft UI24R PA desk > Aux Send to Behringer MA400 headphone amp > Lugs Quad IEM. 

I have a band mix in my IEM coming from the desk but there's times I would quickly like to tweak the EQ or volume of the bass in my IEM & not effect the FOH. We have an iPhone app but it's a pain setting EQ on this & being old-school, I'd much rather just turn a knob on an amp than fiddle with a phone in the middle of playing a gig. *we don't get much if any time to soundcheck as it's mostly weddings we play.

So, is there a way to still send the bass to the PA pre-EQ and somehow get a post EQ feed into my IEM that I can tweak easily by going to an amp? Or possibly a pre-amp pedal as I'm looking at Line 6 Helix Stomp and ditching the Mesa & Barefaced altogether if I can make this work. Initial thought is an active DI sending to the PA (so that's pre-EQ) and then DI from the amp to my IEM into a small mixer that also takes the DI from the PA for the rest of the band mix.  Is that the simplest way?  I have a Sansamp VT Bass DI kicking around if that could be used too.

All advice gratefully received.

 

[la bam]

You could go:

Vt bass - desk.

Vt bass - amp.

Desk mix minus bass - a mini mixer.

Your amp di - a mini mixer.

Output from mini mixer to your iem.

Then you've control over the amount of bass in your mix.

 

That's what I did last weekend.

[jrixn1]

.

Edited yesterday at 08:45 by jrixn1

[jrixn1]

.

Edited yesterday at 08:45 by jrixn1